Conversion Probs

[boomtheroom]

just had my r32 gtst converted to manual ,couple of things that has happened,when it was an auto and was first started in the morning ie. cold it would rev at about 1100-1200 rpm until it was warm then settled at about 800 which is norm,now as a manual i start it and straight away it sits at 800 rpm from dead cold.

also with the aircon on it idles at about 1300 rpm whereas when it was auto it would sit at about 900 rpm ,any fixes to this?

[SECURITY]

wind your timing to 15btdc. auto's run 20btdc.. this is for the rb25det, make sure its right for the rb20.

[boomtheroom]

wind your timing to 15btdc. auto's run 20btdc.. this is for the rb25det, make sure its right for the rb20.

still running auto ecu tho

[Guest 40th-edition]

if u r running auto ecu that may cause the probs!

check that your temp sensors are reading correctly... they can couse this problem.. not knowing when the car is cold