Jump to content
SAU Community

Recommended Posts

Im just bout to get some new injectors,

Im aiming to have at least 330rwkw, im just deciding which size inj to go for. now i figure 555cc can handle 555 bhp which turns into roughly 414kw, once you take out say 50kw for driveline that equals 365rwkw. But the dilema is i dont want it to be near maxing the inj out, i would like to keep the inj duty under 80%, so would my best bet be 555cc or get 740cc just in case i make more power (i dont think i will but).

Link to comment
https://www.sau.com.au/forums/topic/136850-555cc-inj-be-big-enough/
Share on other sites

If it helps, I made a touch over 300rwkw on 550cc injectors and stock fuel pressure, I don't remember exactly what the duty cycle on the injectors was but I think it was around 80-85%. It was deliberately tuned a little rich in the top end (we erred on the side of caution) but still had a bit of room to move.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...