Jump to content
SAU Community

Recommended Posts

I'm glad I came across this thread.

Since taking ownership of my R34 GTR (with Exedy twin plate clutch), I have observed exactly the noises that were mentioned above:

On idle, sometimes there would be a loudish clunking noise sounding from the gearbox area and when depressing the clutch pedal the noise would go away. When the car was turned off the rattle would occur as the engine shut off.

I was pretty worried that it was some clutch/gearbox related issue - but now know it is a common fault with this combination of gearbox/clutch.

Also I believe that my mechanic may have used Redline fluids in the past, so I'll pass this info on and get some of the Castrol Transmax Z or Nissan Getrag Gearbox fluid for future use.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Ive been using redline shockproof oil (smurfs blood) in all our gtr boxes including the getrag whores.

Forsome what of over 8 years now and i cant stress how much i have never had a problem with this oil .

Atf is what they reccomend , but i have seen it destroy high power output cars gearboxes due to the gears breaking through the oil and contacting each other thus heating up destroying the hardedning etc.

I have never seen this with smurfs blood, as the Gears usally break before the oil on the gears is thinned enough for them to contact.

all myths aside, i would not use just normal atf, maybe the one they reccomend But i can not stess enough that redline shock proof is the only way to go ,

my 2 cents.

  • 10 months later...

Hey guys, is the view on this subject still the same? The bulk of this thread is from 2006, so what are people using in their R34 GTR Getrag 6spd boxes these days?

- Nissan Matic D

- Redline Super Lightweight Shockproof

- Motul Gear FF LSD

- Castrol Transmax Z

- Other?

Cheers,

Ed

The 'box in mine is quite noisy when it's cold. Hard to describe the noise, it's kind of whining (not like straight cut gears).

2500rpm or below, just prodding along until car is up to temp. The noise is usually gone after 5min of driving. Is this normal?

Also i heard a few people say the gearbox rattles when they shut the car off - i had this as well, until i actually engaged a gear when turning the car off. It doesn't rattle anymore.

Ed - We catching up soon or what? :P

The 'box in mine is quite noisy when it's cold. Hard to describe the noise, it's kind of whining (not like straight cut gears).

2500rpm or below, just prodding along until car is up to temp. The noise is usually gone after 5min of driving. Is this normal?

Also i heard a few people say the gearbox rattles when they shut the car off - i had this as well, until i actually engaged a gear when turning the car off. It doesn't rattle anymore.

Ed - We catching up soon or what? :P

Yeah man, here too! the first 2 gears has a slight whine until it reaches operating temp and the rattle is from the upgraded clutch u have; very common problem which all aftermarket clutch manufacturers mention.

The rattle is annoying bt jst push the clutch in and turn the car off and u wont get it.

hope your car is going well huy, damn beautiful!!

It rattles quite a bit in traffic, but it doesn't bother me at all.

Car is going great, cheers. No problems thus far (touch wood!) All credit to GT Auto Garage for a mint car.

Thought you were selling yours, no?

It rattles quite a bit in traffic, but it doesn't bother me at all.

Car is going great, cheers. No problems thus far (touch wood!) All credit to GT Auto Garage for a mint car.

Thought you were selling yours, no?

Great to hear, i still have some of your cars pics as my desktop wallpaper :P

Not selling mine anymore, wanted too at one stage cos it was my only car but i bought back my e46 BMW and a little getz as my daily's so the GTR stays as my fun/weekend car.

I get the rattle too occasionally, dosent bug me too much...jst put the stereo on a lil louder hehe!

The 'box in mine is quite noisy when it's cold. Hard to describe the noise, it's kind of whining (not like straight cut gears).

2500rpm or below, just prodding along until car is up to temp. The noise is usually gone after 5min of driving. Is this normal?

Also i heard a few people say the gearbox rattles when they shut the car off - i had this as well, until i actually engaged a gear when turning the car off. It doesn't rattle anymore.

Ed - We catching up soon or what? :thumbsup:

I think that's pretty normal Huy. I don't really recognise it on mine, but my box is generally quieter when its warmed up and it also makes the rattling sound when turning the car off, just like all other Getrag owners. Best to get your fluids checked though as I just changed mine. My Nismo twin plate is not as noisy as I'd thought, which is a good thing.

Yes, catchup soon dude, just busy as with work and stuff...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...