G/box electrics arrgghh!!!

[Ahh32]

Hi guys,

I have just finished putting a turbo engine into my NA R32.

Problem is that my 1/2 cut came with an auto, but a manual g/box was supplied.

The problem is the wiring harness has different wiring for the auto and the manual. I am trying to figure out where the two sensors in the g/box connect to.

I have looked at the old wiring harness (NA version) and connected them up to the same place, but Surprise surprise, no reverse lights.(fuses and bulbs ok)

I am after a wiring diagram for a R32 Gts-t.

Can't see shit reversing out of my driveway at 1 AM.

Please HELP ME

[meggala]

If you go to an auto electrician he should be able to wire it up quite easily Ihave done the same conversion just havent got around to doing the revese lights yet

meggala

my web site has pics and info and the wiring diagram in on the parts and info page

http://meggala.com

[japtaxi]

Not sure if this will help, with my RB25 gearbox, its just a simple add new wirings to connect from reverse light plug at gearbox to the brake light wires at the boot. Please correct me if this is wrong or there is more to it?

[DAMQIK GTS-T]

There is a bit more to it than that.

On the gear box there will be 3 sensors one is for the reverse light (just a switch)

2 is for the neutral to the ecu (also justa switch)

3 the last is the speed sensor (which id imagine that you would of removed as the the r23 use a cable) (not electric).

The engine side will have a few more wires for the auto kick down these arnt needed for the manual.

to figure out which is which is just a matter of testing (short two wires the brake lights come on..... ect. ....ect auto electricans charge the earth for this kind of work