Jump to content
SAU Community

HICAS vs No HICAS (Track use)  

34 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

H.I.C.A.S. = Help I Can't Actually Steer!

It was one of the first things I got rid of on my R34, you'd turn in and a moment later the arse would sorta feel like it "fell over". I found it very unnerving. Throwing the Sydneykid Whiteline kit in and getting rid of the HICAS was one of the best things I did.

There is a thread on here about installing GTRGeoff's lock bar, and there was also an article in High Performance Imports magazine a while ago about removing the hydraulic system from R32s.

The main thing on the track with HICAS is that with the rear end steering you tend to get a sort of "numb" feeling from the back of the car. When you are cornering hard, you tend to "feel" the back end of the car through your seat. You can tell when the back wheels (usually) are starting to slide. When HICAS engages, you tend to loose that feeling. If not completely, it certainly deadens the feeling. It is not that it makes it any harder to steer, you simply lose touch with the road.

thanks guys!!! after having driven the car for about a month now and experiencing the things you guys are talking about I think I will remove it...

now the only question is whats the difference between Sydneykid's Whiteline kit and GTRGeoff's lock bar...

I think I understand the lockbar but what is this Whiteline kit you are talking about?

The only time I can feel HICAS actually doing anything is just after you turn in to a fast corner, doesn't have to be a sweeper just any fast, wide corner.... just after you brake and turn in, the rear of the car feels like it is just about to snap out on you... after a little while you learn to ignore this 'sensation' and just attack the corner... its just for a fraction of a second that the rear feels a little light... worse thing you can do is correct for the slide you think is about to come...

The whiteline kit is as R33S2 describes and I would be looking at this before you worry about cancelling HICAS...

swaybars, springs/shocks, camber adjustment bushes, pineapples made a HUGE difference to the handling of my car... in comparison HICAS doesn't bother me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...