Jump to content
SAU Community

Recommended Posts

Well its a little screw behind the speedo... You have to take the whole speedo out, disconnect all the cables from it, they just pull out. Then its just a gold screw directly behind the speedo, so looking from the front, it should be down the bottom behind the 0, but on the back..... you'll see it. The screw is really small and either gold or silver and you just unscrew it and take it out. It should be near a light bulb on the back. Hope this helps but its really hard to explain. Maybe you want to meet up or something. Where abouts in Syd do you live. **** I just read that yours is a 1999 and I've got a 95, maybe its the same. Ask envy imports 99074144, I took mine out and asked them which screw it was! Or they can do it for $30.

Link to comment
https://www.sau.com.au/forums/topic/13709-speed-limiter/#findComment-270536
Share on other sites

yea I don't know about the wire, but I've heard about it. I got my car a month ago and when I was getting ny car complied I pull it out then. I've only been past 180 about 4 times, on the freeway and on the M2, its not really that much of a thrill. I plan on taking my speed out on the creek.

Link to comment
https://www.sau.com.au/forums/topic/13709-speed-limiter/#findComment-271174
Share on other sites

Taka sells them for US$82 (Pivot), and we all know Apexi also has RSM-GP for US$192 + US$46 for the optional G-Sensor, which makes the whole thing cost around $400... and they both have speed limiter remover function too...

How much better is the RSM-GP compared to Pivot, in terms of accuracy of accelleration measures, etc. I suppose RSM-GP will be more accurate if equipped with the G-Sensor?

Link to comment
https://www.sau.com.au/forums/topic/13709-speed-limiter/#findComment-271772
Share on other sites

Originally posted by toby19

Hello everyone,

Could anyone please let me know what would be the best/most efficient way of taking off the speed limiter on the skyline?

Thanks heaps:uh-huh:

Dude, I have yet to find out if the 34 is the same as the older model in terms of speed cut [removal] - to me it feels more of an electrical / fuel cut than a simple / mechanical screw!

Of course if you buy one of the abovementioned gadgets, it will be fine. In terms of wire 53, I don't know anyone that has done this on a 34 - yet. 33 / 32 have afaik but not ours...waiting patiently :D

Link to comment
https://www.sau.com.au/forums/topic/13709-speed-limiter/#findComment-272761
Share on other sites

Originally posted by rs73

Taka sells them for US$82 (Pivot), and we all know Apexi also has RSM-GP for US$192 + US$46 for the optional G-Sensor, which makes the whole thing cost around $400... and they both have speed limiter remover function too...

How much better is the RSM-GP compared to Pivot, in terms of accuracy of accelleration measures, etc. I suppose RSM-GP will be more accurate if equipped with the G-Sensor?

Not a Sales pitch....

But I have a mate that has all of the above mentioned and selling at a good price. All new and Boxed.

I can pass on his e-mail address if anyone is intrested.

Link to comment
https://www.sau.com.au/forums/topic/13709-speed-limiter/#findComment-272821
Share on other sites

what exactly disables it in an 33 ?

I have a Razo TT, Apexi S-AFC, and a few other electronic gizmos...just curious how it may have been done in mine - any of those devices do that? or somebody just cut the wire when they wired it in?

Just know that mine don't have it (wonder how i know that ;) )

Link to comment
https://www.sau.com.au/forums/topic/13709-speed-limiter/#findComment-272857
Share on other sites

Hey wrxkilla,

Can you provide me your friend's e-mail. I am interested in getting one of those devices.

By the way, I am getting a front pipe from HKS (BD4's) for $385. That doesn't sound bad does it? High flow cat will be courtesy of Just Jap. BD4's also sells HKS FMIC kit for approx $2,500...yum!!

Link to comment
https://www.sau.com.au/forums/topic/13709-speed-limiter/#findComment-273946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
    • Cheers mate. Seems some people get lucky others don't. It looks like the motor was detonating (to be expected if it was overboosting I suppose) as the pistons had a lot of detonation damage, and the bearings were stuffed. The bores were very scoured too, not sure if that's from the pistons or bits of ceramic turbo. By the by now. Have been trying to avoid the rabbit hole too much on the rebuild, and there's been a few hurdles along the way, but with any luck I'll have the car back soon™. Might even pop up a thread then.  
×
×
  • Create New...