Need Help Installing Turbotech Boost Controller

[Freddy Kruger]

Ok im replacing my dual stage with a turbotech boost controller as i just have no need for a dual stage. now where the dual stage was hooked up it was GREY to RED. do i slide it in there, or what? it says connect into the hose off the turbo to the actuator... and that would be (assuming) GREEN to RED. is the YELLOW thingy the stock solenoid? i bypass that dont i?

This should be a quick answer so dont say "search"... tho i will while im waiting for a reply.

Thanks heaps

-Steve

[Freddy Kruger]

reading up... is the YELLOW thing the sensor for guage in the dash? thatd explain a bit i think... maybe

[AlexCim]

Remove the stock solenoid out of the equation all together. (yellow thing)

Plug up the place where the green hose goes to (pre turbo/post AFM nipple).

Run a line from the FMIC piping (blue hose) to the actuator (red thing), then cut that line, and put the turbotech boost controller in there.

Start with the boost controller fully OPEN (unwound) and work your way in. That is safest, otherwise, fully wound in (WILL FREE BOOST) and work your way out.

[kursed]

keen to sell the dual stage controller?

[RBwhatever]

PM QRI05E. He's written up a guide with photo's on how to install.