How Much Oil For Oil Change

[huddy]

hi

i tried a search but had no luck ...

i have a rb20det which is 2.4 motor, i also have an oil cooler with relocater attatched

how much oil do you guys put into a rb20det and should i be adding more for 2.4 + oil cooler

thanks

-Matt

[WazR32GTSt]

i add roughly 4.2L

just add about 3L to begin with, then add 200mL at a time, giving it a minute before checkign the dipstick between each pour. you can't go wrong that way

i'd say the fact that its a rb24 shouldn't make a difference, but the oil cooler would add a little to the capacity.. might add about 200mL more

good luck,

Warren

[GTR32GUS]

my oil cooler takes abit over 1 L

[RB30-POWER]

dipstick?

[huddy]

^^ yep thats me...

just wondering if theres a rough amount everyone uses...

thanks waz32gtst

[andylaurel]

drain the oil

change the filter (lubricate the o ring)

pour in oil until the dipstick reads full,

then run the motor for 30 seconds

stop motor and recheck oil

you will find that the level has dropped as the oil has been pumped into the head and hasnt drained back out yet...

add oil until the dip stick is full

[700HP-GTR33]

Does oil stay in the cooler.......I wonder.

I am sure you also need to drain the oil from the cooler for a complete job.

Anyway use the dip-stik to be safe...a little over is fine.....

[huddy]

took around 4.3 L total