Jump to content
SAU Community

Recommended Posts

i have 2 x 15" 1000 watt rms subs with stupidly big magnets connected to them which i have to install, atm i only have one in in a fairly large box, which i needed to remove my spare tyre to get in, i havnt looked far into the boxes yet, just wandering if anyone knew if i could get a dual 15" box which would fit strait in or even 2x boxes, and keep in mind they cant be too shallow thx in advance

Link to comment
https://www.sau.com.au/forums/topic/137648-big-sub-setup-in-r32/
Share on other sites

so your saying i should make 2x 15" holes in my bootlid and mount them in? genious!!

now serious help please, i know its a bit ridiculous but i had 2x 12" alum 1000 watt rms subs and i duno... just didnt have the deep low rumble i like, i know it will fit all i wanted to know was if any body knew any boxes which would fit strait in, to try make life easier for me before i go to the effort to make one myself or get one custom made depending on how lazy im feeling

Edited by nemz
so your saying i should make 2x 15" holes in my bootlid and mount them in? genious!!

now serious help please, i know its a bit ridiculous but i had 2x 12" alum 1000 watt rms subs and i duno... just didnt have the deep low rumble i like, i know it will fit all i wanted to know was if any body knew any boxes which would fit strait in, to try make life easier for me before i go to the effort to make one myself or get one custom made depending on how lazy im feeling

short of removeing the rear seat that is the only realy way I can see 2 15" subs in there properly.

hahah yeh i have my new body kit on its way here now finally completed and my car is gone till jan 10th :) im spewing man, i cant beleive my car got impounded for a measly little chirpy into second gear.. and yeah all that gear did go in

list of it goes

1x 1 farad capacitor(soon to have an extra 4 farad for sub amp)

1x earthquake 900.5 amp for speakers

1x lanzar 4000 watt mxa 282 amp 2 channel sub amp(if you dont know who lanzar is, its made in the usa by boston acoustics)

2x audiopipe 1000 watt rms 15" dual 2.5 inch voice coil subs

the lanzar amp takes up the whole length of the back of the seat, and earthquake which is pictured as the blue amp in that pic takes up the rhs and the box is a shall box which takes up the whole height of my boot and almost width and lenght so yeh when you open all you can see is system and no floor, it was a bit messy but will re wire and stuff to make it look better when i get the car back

speakers

- earthquake 400 watt 5x7 in doors with tweeters

- earthquake 600 watt 6.5" splits in rear

deck

- pioneer deh-p5750mp

3x 5v pre out with full sub control + multiple amp control

mp3,wma etc

remote

wires

dual 4 guage wires with gold plated terminal

100 amp fuse

3x cadence rca's (i wouldnt recomend these im changing very soon)

12 guage oxygen sealed speaker wires all around

dB rating? not sure yet but will try find out some time soon

what a list.

Ive never tried to fit a 15'' let alone 2 of them.2guup has 2 12's that are a tite fit.i dont rate ur chances of fitting them.

All i could suggest is that you tear out the whole stock boot trim and start from there.make the spare tyre well one hole 4 the sub.but remember u have a huge magnet so make sure the metal in the boot dont interfere.hey! the second sub you could mount like a step.free air would be ur best option n use the boot as the box 4 da home made!!

thats a hektik install in that pic, team lets put an amp through a sub going too fast around a corner....

oh and if your car got impounded, take it to court, get some good legal representation and you might be suprised..

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • Thanks buddy. I thought it was a server storage thing. 馃ぃ
    • Perfect! Thanks for this, both look like great options!
  • Create New...