Need To Connect Back Stock Selenoid R33 Series 2

[WogsRus]

Ok so i had a turbotech boost controller, and my boost was spyking, so i took it off to connect back my stock controller.

HOWEVER which way do the hoses go. Anyone got a pic, Does the hose from the turbo the inlet into the cooler go to the top or bottom of the selenoid. Where does the restrictor go, which way, to the wastgate or back to the gate.

I have run the car and it holds 10psi all the way to 5000rpm and then climbs up to 12-13psi.

The boost comes on strong as i have doen the grounging mod.

I just don't remember which way things go.

Looking at the diagram in the manual, the top goes to turbo inlet side before the cooler, then after the cooler, i pick up the one for the wastgate and the tee. Does the restrictor go after the tee on the wastegate side or before the tee on the intercooler side.

CAN SOMONE post pics.

ALSO if the boost goes up after 5000rpm why?

What could be the problems.

BTW. My car has all the supporting mods, dump, FMIC ect etc, hence the higher boost setting from stock.

[sloazr33]

I think the restrictor goes between the inlet pipe and T piece

[sloazr33]

this is the stock setup

[WogsRus]

thanks guys. any idea why i get a boost creep above 5000rpm?

[WogsRus]

Thankms mate that is exactly how i have it setup, only problem is that it overboost by 2-3 psi and holds it there from 5000rpm onwards.

Gota try and find a solution for that