R32 And R33 Ecu Pinouts

[viewtek]

Hi all,

Im looking at buying a Wolf 3D ECU, it is for an R33 RB25DET so I am wondering if the pinouts are the same. Its a direct plug in ECU. Theres a link below to the item on the Wolf site.

http://wolfems.cart.net.au/details/106280.html

Thanks

[RB30-POWER]

a couple of the injectors are back the front and a few other odd things, but because the wolf doesn't use sequential injection it will not matter.

you could plug it directly into either engine loom.

[viewtek]

thanks for oyur reply, what other odd things were you talking about?

Thanks

[Cubes]

Pinout wire 57 from memory needs to be snipped.

See Paul's pfc faq. http://paulr33.skylinesaustralia.com/docs/...powerfc-faq.htm

It contains the ecu pin out comparison there.

[viewtek]

Thanks Cubes,

So basically if i swap those wires around ill have the same wiring setup as i do now and also have no signal on wire 57. If i was to modify my wiring harness to be the same as the RB25DET could i run a R33 ECU injectors or would the missing functions such as variable valve timing solenoid give my car a heart attack.

Thanks