Jump to content
SAU Community

Recommended Posts

Yeah it is annoying....

Just wanna make sure that something isn't broken or about to break...

yea same here, im going to get the HKS exhaust looked at, it hasnt been touched since it was done in japan, before the i got the car. so not sure. well see if it solves the ticking. might pull it all off and change all the seals/gaskets.

yea same here, im going to get the HKS exhaust looked at, it hasnt been touched since it was done in japan, before the i got the car. so not sure. well see if it solves the ticking. might pull it all off and change all the seals/gaskets.

Let me know how you go as my exhaust is HKS as well and I don't think it has been off the car since import

Be nice if it is that simple

Cheers

Had a similar thing with my old RB20 - I thought it was a sticky lifter, but after I sold it, the buyer advised me that he had pulled it down and there was evidence of piston-slap.

Another possibility, since the noise seems more pronounced on the underside, is a dying / shot big-end bearing.

Had a similar thing with my old RB20 - I thought it was a sticky lifter, but after I sold it, the buyer advised me that he had pulled it down and there was evidence of piston-slap.

Another possibility, since the noise seems more pronounced on the underside, is a dying / shot big-end bearing.

its definently not either of those things. ive built a few engines, and ive heard these noises before even from engine ive owned had to rebuilt cuase of it, the 'Ticking noise" from the sky, is not a KNOCKING.

its a little Ticking. like a switch or something. or when u flick ur light switch.

Yeah id say lifters. My car does the exact same thing its like tick tick tick tick tick tick... in quick succession., i was a a bit worried when i first bought the car, but then figured out what it was. Nothing major.

Just a quick question, how would an exhuast leak make a ticking noise evident from the engine bay?

ummmm.... injectors!!!!

if your talking about a silent ticking sound that sounds like clock work exactly in beat.... its your injectors.... perfectly normal!!!

a loud ticking/taping sound that comes and goes (louder when engine is cold) thats your lifters.

my R31 (RB30ET) has loud lifters the whole time Iv had it (7 years now) - they tap litteraly when they feel like it, never changed them, never were a problem anyways!!

From what everyone is describing - its ya injectors!! :rolleyes:

and dont stress - they're supposed to do that!

tick tick tick tick tick tick tick tick tick tick tick tick tick tick tick..................

Yeah id say lifters. My car does the exact same thing its like tick tick tick tick tick tick... in quick succession., i was a a bit worried when i first bought the car, but then figured out what it was. Nothing major.

Just a quick question, how would an exhuast leak make a ticking noise evident from the engine bay?

it sounds more louder from under the car, but this could be noise rebound. still getting exhuast done, will let u guys know if it did anything :rolleyes:

and yea i thought could be injectors also. we will soon see.

  • 4 years later...

Hey dale im having the exact same problem as u described, it comes from underneath the engine, its definitely not a lifter or a knock in the bottom end.

Did you end up finding what it was?? Will be much appreciated :thumbsup: BTW sorry about the dig up

  • 3 months later...

Talk about digging up old threads.

Sorry for the late reply.. Welcome back to June i guess.

Now about the ticking noise.. Really depends on the noise itself, its definently hard to say our noises are the same.. but for me it is related to the injectors. But why infact is interesting, some people have gotten it from different reasons, but mainly to do with exhaust changes, bumps, or air leaks.

I have brand new Nismo Triple 5's, and mine made no noise till my exhuast scraped a speed hump, coinsidence? perhaps.. however nothing is actually a miss- or broken, so it not broken? dont fix it.. lol

cheers.

I also have the same noise just on startup from the tappets and my understanding is that oil drips into the sump overnight and when you start the car, the oil pump pulls oil back through the head, hence needing to drive like a granny for the first 5mins and not flog it til it's warm.

Or something like that :)

I'm Having the same problem, although ive managed to pinpoint it slightly, if looking at the car from the front the sound is coming from the right hand side of the engine, at the back, close to the firewall, kinda just above where i can see my o2 sensor plug, its a consistent tick tick tick tick tick, jsut like a clock thats a little fast, and it does also seem to go away when engine ahs done some work, but eventually comes back.

what i didnt think to try, was holding the rpm higher then 650-700 and check if the sound recedes, but i'll give it a go when i get home.

a friend of mine said it was defs lifters, and not to worry, but after reading this thread, it makes me want to double check my diagnosis, also, if it is the injectors, does anyone think that an injector bath would help/solve the problem, and or, has anyone actually got results from the injector bath?

oh and by the way, big end bearing noise and lower end tap is incredibly hard to mistake for a ticking, its more like rapping your knuckles on metal, or a clacking sound like some angry kid with a pair of chopsticks being a noisy bugger, ive seen cases of piston slap on smaller engines, and they make quite the distinctive sound, even if your born blind, deaf and daft, you cant miss it, maybe the daft one might, but you get my point.

im quite nooby when it comes to RB's, i know the basics like oil/filters etc, but ive never had the top off of my neo6, so i have no idea where even the plugs are!

good advice everyone btw, so helpful, and no flaming, wtf? is this a forum with real people on it? :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
    • But I think you missed mine.. there is also nothing about the 98 spec that supports your claim..  according to the fuel standards, it can be identical to 95, just very slightly higher octane number. But the ulp vs pulp fuel regulations go show 95 (or 98), is not just 91 with some additives. any claim of ‘refined by the better refineries’ or ‘higher quality fuel’ is just hearsay.  I have never seen anything to back up such claims other than ‘my mate used to work for a fuel station’, or ‘drove a fuel delivery truck’, or ‘my mechanic says’.. the actual energy densities do slightly vary between the 3 grades of fuel, but the difference is very minor. That said, I am very happy to be proven wrong if anyone has some hard evidence..
    • You're making my point for me. 95 is not "premium". It is a "slightly higher octane" version of the basic 91 product. The premium product that they want people to buy (for all the venal corporate reasons of making more profit, and all the possibly specious reasons of it being a "better" fuel with nicer additive packages) is the 98 octane stuff. 95 is the classic middle child. No-one wants it. No-one cares about it. It is just there, occupying a space in the product hierarchy.
    • 98 and 95 have to meet the same national fuel standards beside the actual RON.  91 has lower standards (which are quite poor really), so 95 is certainly not 91 with some octane booster. It would be an easier argument to claim 98 is just 95 with some octane boosters. Also RON doesn't specify 'quality' in any sense, only the octane number.  Anything different retailers decide or not decide to add to their 95 or 98 is arbitrary and not defined by the RON figure.
×
×
  • Create New...