Jump to content
SAU Community

Shell V-power


Kennedy
 Share

Recommended Posts

on 98 (ultimate/optimax) previously had to pull boost back a touch to prevent higher knocks,

on 100 (extreme/Vpower racing) have been able to re-up boost to as previous yet rarely get a high knock.

(pfc is still tuned to 98 fuel as would hate to get stuck in stix with wrong tuning to fuel available.)

works for me,

john.

Link to comment
Share on other sites

tyred on my R33 GTST S2 for the first time about a week ago (shell near garden city), it certainly feels a lot better, no mods just exahust and still stock ecu !!.....

and hense petrol is anyway 10 cents cheaper here in brisy then in melbourne (moved up 1 month ago)..the price still feels better.....

Link to comment
Share on other sites

im pretty sure its now called v-power coz thats what its called in europe. sort of a would wide standard.

ps. anyone ever read the "new unleaded" brocher where it "gets you further"

down the bottom it says in a small disclaimer that the fuel used during the test is "diferant" from what is curently available localy lol so yah it doesnt get you further lol

Link to comment
Share on other sites

i have a question - I pumped up with v-power today (had a quarter tank of ultimate left). Came to about 33 ltrs - but then it only came to 3/4 tank full :(

would there be something to do with expansion of the fuel or is it just that my guage is stuffed? Im guessing my gauge is stuffed.

Link to comment
Share on other sites

Yeah sounds like the gauge is stuffed. Did your fuel light come on though?

nah cos i filled it up when there was quarter tank of petrol....its just wierd - i will see how it goes when i fill it next time (if i get to fill it before my next service). I do know that skyline fuel gauges are notorious for being faulty.

Link to comment
Share on other sites

SK

With your head work, have you run it up on the dyno?

Have you found higher power figures, different boost curve, faster or slower to boost, better or worse economy and response?

Thanks

BASS

Hi, not on the dyno, I am road tuning it. At the moment, with the standard turbo, I have 10 psi at ~2,000 rpm because of the ignition advance I can use, +18 degrees (compared ot the default maps) at many load points. As a result the response is lightning fast.

As for ecomomy, it happily runs 15.1 to 1 A/F ratios at cruise (open loop), with absolutely zero hesitiation or surge. So I can confidenmtly change the lambda aim table when I turn closed loop back on.

:( cheers ;)

Link to comment
Share on other sites

SK. So headwork is a good option on a car, if for instance you are bored and want to pull the head off and have get it tidied up?

You won't loose any grunt?

without changing valves and all that, do you see it as a good thing to do once you have done turbo, injectors etc etc.

How does it go on the $ / results graph?

Link to comment
Share on other sites

Just going back to the title of the thread for a second while we wait for God to respond... I used some of this fuel on the track the other day.

I was expecting to be able to put some more ignition timing in it but knock levels didn't decrease with the change of fuel so I left it alone. I felt maybe 5 more rwkw. However much is the smallest amount I can feel using the seat-of-the-pants-o-meter.

Link to comment
Share on other sites

  • 1 month later...

My car runs nissan-typical-rich. Leaves smoke-screens when i launch so cops dont get me. Running this fule, will that lean it out into a more even mixture?

And i was under the impression that ethanol is bad for older fule systems, clogs shit up n stuff...

Link to comment
Share on other sites

As postred in the other thread where you asked the same questions

Been using 100 ron in the R33GTST since January (almost 12 months). I put an adjustable FPR in recently to raise the fuel pressure and a GTR fuel pump. I checked the fuel lines at the same time and they are in perfect condition.

:D cheers :D

Link to comment
Share on other sites

is it me or why do i still think that my car feels nicer and smoother and 'quicker' on Vortex 98 even compared to V power racing?

Car: R33 gts-t (auto) with basic mods

my best mate with a stock R33 Gts-t Manual has the same opinion?

Edited by dineth
Link to comment
Share on other sites

  • 3 months later...

ive been running vpower now 4 about 2 months in teh 1st week the motor started to run cleaner rev more freely and this improved all week. ive gone bac and tried ultimate etc and

also fuel economy when drivin normally (not v often 4 me lol ) has improved (550 km per tank good? )_

those out there using the ethanol blends from the discounters beware there some dodgy servos (no way ? :( ) out there upping there eth blend to cut costs........

Link to comment
Share on other sites

As postred in the other thread where you asked the same questions

Been using 100 ron in the R33GTST since January (almost 12 months). I put an adjustable FPR in recently to raise the fuel pressure and a GTR fuel pump. I checked the fuel lines at the same time and they are in perfect condition.

:rofl: cheers :rofl:

So have I. seems to be great.

I have a 100RON joint near my house..I only drive the car 1 time per week so the extra cost means nothing to me.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Just ordered those bosses, hopefully that does the trick thank you very much everyone for your replies it's really appreciated  
    • to have this type of adjustment possible with a curve as I wish, what budget (engine) should be planned?  
    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
×
×
  • Create New...