Jump to content
SAU Community

Recommended Posts

Cant believe I could be f'ed doing this

http://www.djrperformance.com.au/dynographs.html

Very nicely inflated results there

and

oh look a Chassis dyno...not an engine brake

http://www.djrperformance.com.au/services.html

so

he was claiming rwkw's

  • 3 months later...

1989 Nissan Skyline R31 Silhouette

RB30E

GTS2 Extractors

3'' Straight Pipe

20 Degrees BTDC Ignition Timing

98 PULP

Scan_Pic0001.jpg

Also just going to mention that my car is over fueling and running extra rich so that would have taken some out of it.

  • 2 weeks later...

2007 V36 370GT VQ37HR 3.7L V6 5SPD AUTO

Modifications:

Cat-back exhaust pipes

Hi-flow panel filters

2011-09-17165602.jpg

Apparently car runs rich from factory, bit more power to squeeze out of it if I can lean of the a/f ratio a bit

Stock Power run done close to when I first got the car for reference:

2011-09-17165537.jpg

th_video-2011-09-17-11-49-21.jpg

  • 3 weeks later...
  • 1 month later...

+1

also love how the radiator hoses are put as a modification

I thought this thred was for dyno figures? apparently not.... Anyway, Ive only put down what was read out at the car show where the dyno run was done, And I thought the turbo r34 standard are 208kw and the gtr 280kw? From what I've read about a million times N/A RB25de neos do about 147kw standard?? is this wrong coz the thing will keep up with my mates boosted s14 no problem?

I thought this thred was for dyno figures? apparently not.... Anyway, Ive only put down what was read out at the car show where the dyno run was done, And I thought the turbo r34 standard are 208kw and the gtr 280kw? From what I've read about a million times N/A RB25de neos do about 147kw standard?? is this wrong coz the thing will keep up with my mates boosted s14 no problem?

both the r34 GT-t and the GTR are quoted as having 206kw at the flywheel (all factory quoted figures are at the flywheel) however the GTR actually puts out more power. and yes, the non turbo is 147kw (again, at the flywheel) which would work out to be about 150hp at the wheels

  • 2 months later...
  • 3 months later...
  • 4 weeks later...

R31 Skyline Series III Ti

RB30E

Stock Motor Done Near 800,000K's - Runs A Little Off Beat

Runs a rusty old set of extractors with old stock exhaustand had 4.11 Diff ratio which was stuffed open wheeler "Just about to install 3.23 LSD"

New GTS1 Cam, Timing Kit, Plugs & Leads - Installed 6 Weeks Ago!

15" Ti Alloy mags

Does 10KPL Religiously & equates to almost 600K's Per tank

Am shortly contemplating in dumping the NA high comp motor that I've got with around 80,000K's on it and VLT auto trans that's only done a few hundred K's along with Hi-tech headers "Stainless" and 2-1/2" sports exhaust. WIll be interested in seeing if the figures change much along with the 3.23:1 LSD installed.

  • 2 weeks later...

Just got my v35 350gt8 a week ago. runs 200kw at flywheel stock. Waiting on a few parts to turn up.

Used to have a na b18c type r powered crx with a few bits here and there running high 12s low 13s.

bout 180fwkw

Gonna try and beat that with the extra na displacement.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • ...oops. forgot the TCU end...
    • No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...