Jump to content
SAU Community

Recommended Posts

Hi,

my bro's car is using fuel like you wouldn't believe and has probably been doing so for a while, he wouldn't have noticed. I've been driving it a bit because my car is getting resprayed and was looking forward to the less fuel consumption compared to the Skyline. Blow me down, i get a 14.2l/100km's out of a 2ltr, 4 cylinder golf!

I'm thinking it's running stupidly rich as at night you can see smoke behind the car, can't really see it during the day. And smells quite petrolly too.

He's had issues before with fuel (wasn't putting in the right fuel, unleaded instead of premium, screwed things) so i'm guessing the CAT is well and truly dead. But i was just wanting to do a ECU reset, hopefully get things back to normal. Anyone know how to do this on a 2001 VW Golf?

couldn't believe the fuel consumption....

i do the same thing on my excel every now and then

what i do is warm the car up to normal temp, then remove the red battery terminal

i let it sit for a about 5 minutes, then depress teh brake pedal for ~20 sec to discharge all teh capacitors, then immediatly connect the battery back up again

now i dont no how well this would work in a more modern car with a more sophisticated ecu, so i wouldnt really recommend it unless ur confident to do it, as it has the potential to screw something up

hope it helps

My uncle's VW passat in Poland had a simular issue last year. We just left the car off and disconnected the battery with the brake pedal pressed for 5 min and then reconnected the battery and voila!.

also cleaned out the AFM and replaced the 02 sensor.

hope this helps! also if you have a security coded radio make sure you have the code before you disconnect the battery.

Cheers!

you wont be able to Reset a vw ecu as such,

if it has as many issues as you describe, take it into any audi or vw dealership and get them to check the fault codes, they shouldnt charge you

then you will know the issue

cool, that's a good idea. Get the codes checked first.

I was shifting between 2000-2500 rpm. I know my brother drives the car hard (the suspension takes an absolute hammering) but i was being granny. And still, 14.2l/100km's. Pathetic.

how far are you driving each? if you are only driving short distances then that will be part of the problem. the car is still in cold start so it is running richer.

also if you are doing city driving where you stopping and starting a lot then that has an effect too. remember that the car is still using fuel while it is sitting there idling.

show me a properly working 2001 Golf that uses that much petrol when city driving

reading taken from 20litres of petrol. I travalled 140km's. Mainly beach rd driving, during non-peak hour (i work shifts) So sitting on 60km/hr for the majority, not stop start. It's a good run on beach rd. Trust me, it's something very wrong, but will get checked as soon as possible. Prob do the codes before i run around resetting ECU's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
    • STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...