Jump to content
SAU Community

R33 Gtr Series 3 V's Vspec

2BNVS

By 2BNVS,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

JAGR33 Grand Master

JAGR33

Posted
Posted

V-SPEC has A-LSD diff with cooling fins, different suspension (stiffer) from standard...

Series 3 has xenon headlights, dual airbags, red stitching on seats and door trims, different steering wheel, red fog light on right tail light instead of reverse light, bigger (deeper) front lip, N1 slots in front bar compared to a 1995 model..

There is also another colour available in the series 3, smoked silver..

Oh and of course its a newer car :) ....

ookami Experienced

ookami

Posted
Posted (edited)

its called sonic silver :) I went for the non-vpec cause it was about 5 grand or so cheaper and quite often in japan they remove the alsd and replace it with a mechanical when they use the car for drag or circuit racing. I figured that was part of plan in the future so may as well not waste money on parts i'm just going to replace. Also Forgot to add that the series 3 gtr gearbox has the best syncros out of all the nissan skyline 5 speeds and when you go to a os giken gearset you actually need to upgrade your syncros to that of a series 3 ....

Edited by ookami

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      WTB noltec r32 front upper (camber) arms

      By GTSBoy · Posted

      I swear at my GKTech ones every time I have to take them apart and replace a spherical. But I wouldn't swap them for anything else. They absolutely slay every other option, at least in terms of how they actually work. You sure you don't want to live with bearings? I mean, they don't have "ball bearings". They are rod ends and sphericals throughout. Tough as nuts, even though I have found more than one way to wear them out.
    • The Bogan
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By The Bogan · Posted

      From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • GTSBoy
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By GTSBoy · Posted

      Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
    • Shoota_77
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By Shoota_77 · Posted

      Slight segway but the most expensive part of the whole thing which I would have thought would only be required for an engine size/type swap, not a VIV test, is emissions testing.  That's when you get into the big bucks.  I can't remember the exact price now but I got quotes for the GT-R based on swapping to RB30 (not that anyone bothers doing it legally anymore...) and it was around $4500 just for that alone.  The guy that does them manipulates the tune on the vehicle to make sure it passes.  The cheaper option is to book into Kangan Batman Tafe (I think that's where it was) and hire their tester.  Allegedly you're not allowed in there with the car though so not in a position to tweak anything to make sure the vehicle passes.  I'm sure in this day and age of ultra tuneable ECU's you could get the tuner to program a special efficiency (clean) tune that emits the lowest amount of particulates possible that would pass the test.  It might only make 50kW's but as long as it passed who cares!
    • The Bogan
      Neil's R33 Gts-t Build

      By The Bogan · Posted

      I'm sure he has left signs, or, he is looking down, laughing That's my cunning plan for when I leave, lots of half finished projects, with no rhyme or reason of where I was actually up to, just to keep everyone on their toes
×
×
  • Create New...