Jump to content
SAU Community

Recommended Posts

Hey guys just joined up and did a search, no results so here goes.

Looking at a R33 on this forum and need to know ball park figures for fuel economy.

I have never owned a boosted car before so do not really have a good grip on fuel consumption for such a car.

Also anything to look out for when buying one (set on a R33) such as common faults from production etc.

Thanks guys

Joel

Link to comment
https://www.sau.com.au/forums/topic/138646-r33-gtst-fuel-economy/
Share on other sites

There have been a few threads on this. Mine did about 14L/100km in the winter on the stock ECU (with intercooler, exhaust, pod), now does around 12.5-13L/100km and the only reason i can give is hotter weather. Stockers should do 10-11L/100km from factory specs. A Power FC or other aftermarket computer helps lower fuel consumption on modified cars back to near stock when cruising.

There's a thread here for what to look out for when buying a Skyline.

Edited by govich

fuel economy depends on how you drive it. i drive rather 'spiritedly' and i get about 16-17L/100k. i have full exhaust, pod, frount mount and 14psi. that is city driving. on the highway (even if its just 80kmh zones) it drops to about 11L/100k.

R33 GTST

mild hi-flowed turbo @ 1bar, PFC, fuel pump, reg, full 3" exh, pod ~210rwkw

Consistent 450km/55L - 12.2L/100km

Highway driving ~600/55L - 9.17L/100km

Edited by Lazy-Bastard

lazy-bastard: thats mad fuel economy, my car struggles to see ~340 to a tank and thats normal everyday driving. Will my fuel economy increase by heaps with a pfc?

my brother has spoken to a few drifters and they get consistand 400+ to a tank even though they have over 250kw.

i think its tune dependant i think. Im running 209kw on 12psi and im on around 11-12 psi everyday, fuel economy is poor. I have been told by tuners and others that my fuel economy will be heaps better with 250kw and a pfc.

lazy-bastard: thats mad fuel economy, my car struggles to see ~340 to a tank and thats normal everyday driving. Will my fuel economy increase by heaps with a pfc?

my brother has spoken to a few drifters and they get consistand 400+ to a tank even though they have over 250kw.

My car had an SAFC2 when I bought it and I was getting about 400ks/55L, so the PFC tune did improve economy a bit.

fair enough, i think if you have a conservative tune, then you will see good km's to a tank. Instead of dumping a whole heap of fuel for no reason, you use every bit of fuel that is allowed in.

1998 R33 gts25t manual completly standard, i could get 500km for a full tank driving it like a granny, i normally get about 200-240km from half a tank of 95 octane depending on how it drive it.

I got my SAFC II tuned and i managed to pick up about 50 ks in town, if i drive it now i would see 400 km in town out of 55 liters but highway is only about 500 if driven nice. I have already changed the O2 sensor and makes no differance.

On average i fill up with 35-40L and get around 350-450k to a tank depending on the type of driving i am doing

Mods are just a exhaust & air filter

I read somewhere that they are meant to do 9L/100k....

I get around 14-15 l/p100k's around town if i drive carefully.... If I hammer it, it can be as high as 19!!!

Just did a run from Cairns to Cooktown and it averaged 14.5. That was sitting at 130kph-150kph (open roads with no-one on them - just gotta watch for cows and roos)

On the way home I sat 110-120kph and I think that has improves it to around 12....

That is in a series II R33 with exhaust and 10psi.......

:(

  • 7 months later...

Guys when doing highway trip i dont get much more out of a tank then if i am city cruising..

I get about 380-400km from 50 liters in the city pretty consistantly, but do a 200k round trip on the highway in there too and am lucky to see 420-430 from 50 litres.. I would have expected above 450km's from 50 ltrs.

Is this a sign my o2 sensor may need replacing, or is this common for a skyline not to get good highway economy.. This is my 2nd r33 and both cars were the same.

Series 1 rb25det exhaust, cooler, pod, 8-9 psi, .8mm copper plugs which are newish...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ...just a note of warning, you shouldn't drive it about with the TCU in limp mode with only 3rd gear available ~ apart from the fact you end up sheering the ATF at the torque converter interface, the high clutch in these isn't especially the strongest, particularly bolted to the RB25DE mill...which is likely a 4AX01 box with lighter duty high clutch (the RB25DET got the bigger high clutch)...be careful out there...
    • Hoping to do similar mods to my RB20 once I get it running and reliable again
    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
×
×
  • Create New...