Jump to content
SAU Community

Recommended Posts

Hi everyone just need your help have searched the forum n tried, what could be wrong with my r33 gtst series1. I was driving just cruising around on a hot victorian day, when slowed down to stop on a traffic light my car suddenly stop running, all the power lights still running stereo on and nothing that would suspect its the battery. Jump start it no go. Push start it again n again no go. den went n bought a new battery with 470cca on it, still no go. when I turn the ingnition on I can hear the fuel pump priming, then turn key all the way to start, all i hear is just a click, dash lights dim then nothing not even a crank just a click.Ive checked the crank angle sensor, afm (cleaned), push all the plugs making sure they are connected properly, tap the starter motor with a hammer,checked all the fuse in the car, boot, and front engine but all is fine and still no go. what could be wrong. Here are my mods fron mount, piggy back fuel controler(e-manage), boost control 10psi, changed my ignition to a waste spark. Please help!!! THANKS

Link to comment
https://www.sau.com.au/forums/topic/138661-help-car-wont-start-whats-wrong/
Share on other sites

But there's still power. Headlights n interior lamps work all electronic works, put in a new battery with 470ccamps on it but still doesnt start. tried push starting it no go, jump start it still nothing all I hear is a click thats it no crank or anything its not turning over....

But there's still power. Headlights n interior lamps work all electronic works, put in a new battery with 470ccamps on it but still doesnt start. tried push starting it no go, jump start it still nothing all I hear is a click thats it no crank or anything its not turning over....

If thats the case it has to be the starter motor its prob seezed up on you or something, when you try to push start it does it try to crank over if it does your starter motor shouldnt be seezed it would be an electrical prob.

good luck with that.

Yeah I was thinking maybe the igniter does'nt work cuz of my waste spark set up. But why does'nt it crank. I can hear a click but that's it. Does anyone know how to check the ecu error code. Sorry guys but realy desperate here!! Thanks for the replies

Does anyone know how to check the ecu error code. Sorry guys but realy desperate here!! Thanks for the replies

You have to get the car to a workshop with the computer to plug into the car to read the error code as far as I am aware unless there is an aftermarket tool to do this?

Probably easier and quicker cause of time of day that you call the NRMA or local motoring group in your state and get them to come out and check it out.

Drew.

if it clicks and doesn't turn over the starter isn't working, either because it is dead, its not getting enough power (battery or alternator), or it's relay is stuffed.

Pull the starter off, clutch start it down to an auto electrician and get them to check the starter and its solenoid.

yeah id guess starter motor. only problem i had with that was i had to have mine rebuilt. couldnt find a second hand one. still only took a day for my mechanic to take it out, send it away to be rebuilt and put it back in. think it was $260 all up.

this sounds like a starter motor. because the click you hear when you turn the switch is the start relay cliking. but then again why would the car die in mid traffic?? i mean the starter doesnt run while youre drinving. have you ignition cheked, look into your rebuilded ignition setup, maybe somthing wanst hooked up properly. When i tell people to stick to their stock type ignition systen ie the 6 coil setup, they ont tend to listen.

gday

you could have blown a fuse?

thats what happened to me i was at a stop sign and then my car just died, i tried to clutch start it but it had no effect, later on my mechanic said i had blown a fuse.

so why dont you check that out.

hope this helps, goodluck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • PULSAR PSR2860R 0.86A/R or 0.64 GEN 2 Turbocharger Both are -50*67mm 8 blade billet compressor wheel Cheers  
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe.....EDIT... nope, the Kraken is a cast jobbie, the REv9 uses welded up stainless, plus $8000 AUD before shipping, installation and tuning) Where else in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit that Pulse fitted, and it was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe), where in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit, and was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet  
    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
×
×
  • Create New...