R32 Gtr Kit Fitting To R32 Gtst

[RB20JT]

guys i recently purshase an r32 gtst and i wanna put the r32 skide skirts, front bar and bonet on. However, im not sure what mods i would have to under take to change these parts? eg..are the lights different? will the front bar line up with std guards?

any help would be much appreciated.

[N1GTR]

Hi,

The guards are wider, so the front bar will probably need some work to get it to fit, ive seen GTR bonnets go on GTST's without issue though

If you're in Sydney, i have a bonnet going very cheap if you havnt already found one

[xRHETTx]

The bonnet fits, just need the gtr bonnet latch for the front (and the grill if you want).

The side skirts will need work too, as the gtr rear and front guards are wider. Just put the gtst side skirts on, they look better anyway IMHO.

The front bar fits but not perfectly, many people on these forums have done this. The big plus from using a genuine GTR front bar (as opposed to a fibreglass GTR copy designed fot GTSt) is that it is made from plastic and therefore a million times stronger.

[cowie165]

For reference, new GTR front bars are available from Mr Nissan for around $400-$500, depending on your mates rates.

Might be worth a look if you're paying $300 for fibreglass

[foznice]

who has a picture of GTR skirts?

Because of have normal type m skirts on my GTST, and I have seen GTR's with a sort of mudflappy looking thing added on top.. wouldn't mind getting one...

I'm trying to work out if all GTR's have this, or just some

[cowie165]

The mudflap thing you're talking about is probably the Nismo rear skirt. Option from Mr Nissan, standard on the Nismo edition GTRs.

You can buy them but it'd be a little tricky to fit to your rear skirt Rylan, cause the GTR rear quarters are fatter.

[RB20JT]

MR Nissan? im not familiar with any place to get these parts from. Im from sydney..st george area. Any got any suggestions? i need a bonnet 100%, and gtr front bar and grille.

thanks for ur suggestions guys!! much appreciated!!

For reference, new GTR front bars are available from Mr Nissan for around $400-$500, depending on your mates rates.

Might be worth a look if you're paying $300 for fibreglass

[cowie165]

Sorry Daniel, Mr Nissan = Nissan dealership

If you join the SAU NSW club you can receive discounted parts from a few listed Nissan dealerships. You'll save the membership fee (through discounts) very quickly.

[RB20JT]

thanks man, lol mr nissan? nissan dealer! arent i a knob!! thanks for your help guys!!1 much appreciated. So just nissan spare parts, give them a ring and they can get original front bar?

thanks

[Husky33]

I have a genuine gtr front bar and it fits perfectly.

It doesnt look like any mods were done either, except maybe the reo support.

[cowie165]

So just nissan spare parts, give them a ring and they can get original front bar?

thanks

Yep. You'd be best off to join the SAU NSW club (hint, hint) so you can receive trade/club discounts and you'll also know who to talk to at which Nissan. Otherwise, you'll no doubt have some older guy who wants your VIN and then tells you that VIN doesn't exist and you can't have parts, then tell you the Skyline parts aren't made anymore, etc.

Talk to the right guy and you'll have a genuine front bar in two weeks.

Oh yeah, 180_mph touched on a good point, you'll need a GTR front reinforcement bar or you'll have to cut up your GTSt one. I'd go to a wreckers or SAU for sale to find a used front reo bar.