Jump to content
SAU Community

Recommended Posts

post-32230-1160823598.jpgG'day guys, i recently bought an r34 gtt and would like to put the boost up. the only mods i have are exhaust, intercooler, and now a boost controller. as far as i know its ok to have 14psi on stock? do you think thats ok or will i fry things like the turbo? what is a good boost to run on the neo 6??
Link to comment
https://www.sau.com.au/forums/topic/138693-upping-the-boost-on-r34-gtt/
Share on other sites

most people say 10-12psi. it really depends on when the ecu hits rich and retard. you will know when you hit this as it kills the motors power. it retards the timing and richens the fuel right up.

i run 14psi on my 33 with a remapped ecu. goes a lot better than 12psi, and when my turbo blows i have an excuse to get a new one.

so i could run the standard boost on low and maybe 11psi on high you think and that should keep me happy and stop me from spending more money. after buying the car i dont have much of that left! she's only done 35000 k's!

I found 34 gtt's hit r&r a lot easier and harder than r33's. I dynod one stock, and then after a turbo back and front mount, nothing else, and r&r was savage, lost up to 30 kw, only gained about 5kw after it clawed its way out of the hole.

well maybe you coulod get a fuel cut defender, or if in your budget just get a pfc now save your hassles later on, just a thought if not try 9-10psi if it retards then just back the boost down, it will still feel better than standard.

Have a look in the trader section search a user by the name of performance-wise he does group buys on powerfc's with the handcontroll for under 1000 delivered i just bought a unit through him very good to deal with.

They are a complete engine management computer which replaces the standard ecu allowing the car to be very efficiently tuned getting the most out of the engine and its modifications.

Edited by fEkuaR
Have a look in the trader section search a user by the name of performance-wise he does group buys on powerfc's with the handcontroll for under 1000 delivered i just bought a unit through him very good to deal with.

They are a complete engine management computer which replaces the standard ecu allowing the car to be very efficiently tuned getting the most out of the engine and its modifications.

thanx man, just checked it out, should i still be buying my electronic boost control or does the power fc cover that as well?

thanx man, just checked it out, should i still be buying my electronic boost control or does the power fc cover that as well?

You can use a apexi boost control kit that goes with the powerfc. Or you can just run a seperate boost controll unit. The boost controll kit with the powerfc is a little extra but if you havnt bought a controller yet id go with that and get it at the same time you can buy it with the group buy aswell.

most people say 10-12psi. it really depends on when the ecu hits rich and retard. you will know when you hit this as it kills the motors power. it retards the timing and richens the fuel right up.

i run 14psi on my 33 with a remapped ecu. goes a lot better than 12psi, and when my turbo blows i have an excuse to get a new one.

When your turbo blows the smaller ceramic particles that can result can find thier way back into the engine. This is why blowing the stock turbo isn't a good 'plan' even if it's the excuse you want to buy a new bigger one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Read the ECU for fault codes or have someone else do it. A faulty coolant temperature sender is usually listed in ECUs. If the sensor itself is not busted it can also be a bad ground connection. Or in a really unlucky case, damaged wiring.
    • Can't be a Futjitsubo as those are made with a flex piece and Reimax is smaller in pipe diameter. If anything it is closest to a Mines pipe, but evidently it is not an actual Mines pipe.   Classic word humor
    • Alright I will try to not forget.   As GTSboy replied to you already, problem is mainly the mismatch between the actual exhaust part and the denomination in the papers. That basically just looks like tampering to a cop, if they were to check your car and notice. If it had been done right they would have clarified it to be a custom pipe and just given it a certain part number that you have to engrave or weld onto the pipe. I will definitely inquire on what to do. Changing the pipe wouldn't be my favorite solution as it costs a bunch of money and the cat was fitted with the front pipe and exhaust under the car, and if the front pipe flange does not sit in the OEM location the cat will need to be refit for any other pipe to work. It also usually doesn't need a brand name or something like that, but more something like a part number. Usually for exhaust parts, on silencers and cat units specifically, there is a badge that reads the certificate number that belongs to these exhaust parts under EU regulation. You get these numbers after you put a part or group of parts through the tedious testing according to EU vehicle legislation and they pass. You can find these "part numbers" on various parts throughout a EU vehicle. On windows, headlights, engine parts, seat belts and so on. All these parts have gone through standardized testing and acquired a so called ECE or EG Certificate that makes them legal to use by themselves in all countries that adhere to these standards. You can also not alter these parts in any way, if you do they become illegal. An example for stampings on an exterior lighting part, the people who need to know can find the documentation for this unit in a database. I do not know what all the standards and so on mean.
    • If that was the case I suppose you could call it "Mein's" brand....  ... I'll see myself out... 😅
×
×
  • Create New...