Jump to content
SAU Community

Recommended Posts

post-32230-1160823598.jpgG'day guys, i recently bought an r34 gtt and would like to put the boost up. the only mods i have are exhaust, intercooler, and now a boost controller. as far as i know its ok to have 14psi on stock? do you think thats ok or will i fry things like the turbo? what is a good boost to run on the neo 6??
Link to comment
https://www.sau.com.au/forums/topic/138693-upping-the-boost-on-r34-gtt/
Share on other sites

most people say 10-12psi. it really depends on when the ecu hits rich and retard. you will know when you hit this as it kills the motors power. it retards the timing and richens the fuel right up.

i run 14psi on my 33 with a remapped ecu. goes a lot better than 12psi, and when my turbo blows i have an excuse to get a new one.

so i could run the standard boost on low and maybe 11psi on high you think and that should keep me happy and stop me from spending more money. after buying the car i dont have much of that left! she's only done 35000 k's!

I found 34 gtt's hit r&r a lot easier and harder than r33's. I dynod one stock, and then after a turbo back and front mount, nothing else, and r&r was savage, lost up to 30 kw, only gained about 5kw after it clawed its way out of the hole.

well maybe you coulod get a fuel cut defender, or if in your budget just get a pfc now save your hassles later on, just a thought if not try 9-10psi if it retards then just back the boost down, it will still feel better than standard.

Have a look in the trader section search a user by the name of performance-wise he does group buys on powerfc's with the handcontroll for under 1000 delivered i just bought a unit through him very good to deal with.

They are a complete engine management computer which replaces the standard ecu allowing the car to be very efficiently tuned getting the most out of the engine and its modifications.

Edited by fEkuaR
Have a look in the trader section search a user by the name of performance-wise he does group buys on powerfc's with the handcontroll for under 1000 delivered i just bought a unit through him very good to deal with.

They are a complete engine management computer which replaces the standard ecu allowing the car to be very efficiently tuned getting the most out of the engine and its modifications.

thanx man, just checked it out, should i still be buying my electronic boost control or does the power fc cover that as well?

thanx man, just checked it out, should i still be buying my electronic boost control or does the power fc cover that as well?

You can use a apexi boost control kit that goes with the powerfc. Or you can just run a seperate boost controll unit. The boost controll kit with the powerfc is a little extra but if you havnt bought a controller yet id go with that and get it at the same time you can buy it with the group buy aswell.

most people say 10-12psi. it really depends on when the ecu hits rich and retard. you will know when you hit this as it kills the motors power. it retards the timing and richens the fuel right up.

i run 14psi on my 33 with a remapped ecu. goes a lot better than 12psi, and when my turbo blows i have an excuse to get a new one.

When your turbo blows the smaller ceramic particles that can result can find thier way back into the engine. This is why blowing the stock turbo isn't a good 'plan' even if it's the excuse you want to buy a new bigger one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I swear at my GKTech ones every time I have to take them apart and replace a spherical. But I wouldn't swap them for anything else. They absolutely slay every other option, at least in terms of how they actually work. You sure you don't want to live with bearings? I mean, they don't have "ball bearings". They are rod ends and sphericals throughout. Tough as nuts, even though I have found more than one way to wear them out.
    • From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
    • Slight segway but the most expensive part of the whole thing which I would have thought would only be required for an engine size/type swap, not a VIV test, is emissions testing.  That's when you get into the big bucks.  I can't remember the exact price now but I got quotes for the GT-R based on swapping to RB30 (not that anyone bothers doing it legally anymore...) and it was around $4500 just for that alone.  The guy that does them manipulates the tune on the vehicle to make sure it passes.  The cheaper option is to book into Kangan Batman Tafe (I think that's where it was) and hire their tester.  Allegedly you're not allowed in there with the car though so not in a position to tweak anything to make sure the vehicle passes.  I'm sure in this day and age of ultra tuneable ECU's you could get the tuner to program a special efficiency (clean) tune that emits the lowest amount of particulates possible that would pass the test.  It might only make 50kW's but as long as it passed who cares!
    • I'm sure he has left signs, or, he is looking down, laughing That's my cunning plan for when I leave, lots of half finished projects, with no rhyme or reason of where I was actually up to, just to keep everyone on their toes
×
×
  • Create New...