Jump to content
SAU Community

Recommended Posts

my r33 gtst has recently been letting off a really bad fuel smell within the car. after ive been in the car for 15 mins or so i start to get a pretty strong smell of fuel.

i have checked under the car and theres no leaks to be seen so i have nfi what could be causing it? is this a serious problem?

on a side note, does anyone know where u can buy replacement break lights for the r33 S2 spoiler? the break light was loose on my spoiler and its fallen off :\

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/
Share on other sites

I have a similar fuel smell only becomes bad with the sunroof open and windows down? I get good fuel economy and Ive had two mechanics check it out but didn't find anything. If you find the problem post it up, prolly a common issue.

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2590797
Share on other sites

I have a similar fuel smell only becomes bad with the sunroof open and windows down? I get good fuel economy and Ive had two mechanics check it out but didn't find anything. If you find the problem post it up, prolly a common issue.

I started to get a bad fuel smell, but I had really poor fuel economy - was running rich, hopefully it goes away with the next tune.

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2590811
Share on other sites

my r33 gtst has recently been letting off a really bad fuel smell within the car. after ive been in the car for 15 mins or so i start to get a pretty strong smell of fuel.

i have checked under the car and theres no leaks to be seen so i have nfi what could be causing it? is this a serious problem?

I have a similar problem where I get the fuel smell, only when the windows are down though

my fuel cap somtimes works loose, tighten it up and all is good

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2591165
Share on other sites

Is your filter :( plastic or metal construction.

Sometimes this can be a faulty unit.

I have had 2 fuel filter go on me to date...both nissans.

But yeah...you just picked up your car so, get it checked out....You can normally feel with your hand around the hoses to see if there is a leak. You can also smell were it is coming from normally.

Good luck and hope I have been of some help.

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2591942
Share on other sites

Is your filter :( plastic or metal construction.

Sometimes this can be a faulty unit.

I have had 2 fuel filter go on me to date...both nissans.

But yeah...you just picked up your car so, get it checked out....You can normally feel with your hand around the hoses to see if there is a leak. You can also smell were it is coming from normally.

Good luck and hope I have been of some help.

Yeah, i get fuel smell around my filler and in my engine bay. Not noticable in the cabin though....might have to inspect this fuel filter. Where can i locate this in the RB20DET engine bay?

*had my car for ~4 months (purchased complied and serviced)

Cheers,

Steve.

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2592120
Share on other sites

had a similar issue with mine not long ago, mech changed the fuel pump, and the rubber on the inlet hose had a pin hole leak..and was spittin out fuel..

u might wanna pop inside ur boot, open that lid to the right of the battery, get someone to start the car up and jus have a quick look if there fuel spittin out of anywhere there.

hope that helps

cheers

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2592216
Share on other sites

as mentioned, it's often fuel cap, also those temporary ones you get from servo's. You end up having the fuel in the tank splash against the cap when going around corners + fumes = bad smell!

Also if you have changed your fuel pump recently and broke the rubber seal around the pump housing .

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2593190
Share on other sites

try going to supercheap and buying about 3metres of fuel hose and about 6 new small hose clamps

then when the car is cold, look under the hood and find the fuel lines in the bonnet. there should be 3 rubber hoses:

1 - from teh bottom on the engine on drivers side to the fuel filter

2 - from the fuel filter to the fuel rail

3 - coming back from the fuel pressure regulator to the bottom of the engine bay again

i replaced all hoses and clamps, and my fuel smell went away :laugh:

if you are going to do this, i suggest also replacing the fuel filter while you are at it and i even relocated the fuel filter to be within easier reach.

when doing this, remember to remove the fuel pump fuse and crank the car for a few seconds first to get all the fuel out of the lines...

it can't hurt to do it even if there's no problem, as hoses get brittle after 15 or so years of being exposed to 100deg temps!

cheers,

Warren

Link to comment
https://www.sau.com.au/forums/topic/138995-fuel-smell/#findComment-2600964
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jap premium will be 100 RON. You should use 98.
    • The exhaust gases are at their highest temperature as they leave the exhaust port and enter the manifold. They cool as they flow through the manifold because they transfer heat to the manifold and the manifold loses heat to the surrounding environment. Thus, inevitably, the exhaust gases are cooler as they enter the turbo compared to when they entered the exhaust manifold. So, yes, the exhaust manifold can easily get as hot as the turbine housing. Having said that, you will generally see the highest temperatures where the exhaust gases have to slow down or they are concentrated into one area - which is usually the collector on the manifold and in the turbine housing, because the gases slam into the metal at those places, increasing the convective heat transfer coefficient and transferring even more heat to the metal than they might just flowing past elsewhere. Exhaust manifold heat shields are a good idea - certainly for the stock manifold they are there from the factory. People seldom have anything like that on a tubular manifold because they are hard to achieve. Some might wrap a tube manifold with fibreglass tape - but this has a reputation of leading to cracked welds. The best case is generally to put ceramic coating onto the manifold to prevent it getting as hot (internal coating) and radiating/convecting heat into the bay (external coating). All the real heat from a turbo comes from the exhaust side. The gases entering are at ~800-900°C and the steel/iron gets nearly that hot. The compressor side is only going to heat the charge air up to <<200°C (typically not much more than 100°C). So that's nothing, by comparison. The compressor is not a significant source of engine bay heat.
    • Late to the party, specifically joined this forum as I just bought one of these and this thread has been a gold mine of info. If the OP is still around, mind if I ask what gas you been putting in yours? Mine has a Japanese sticker in the cap saying premium but it seems to get way worse mileage on premium (95) than 91. I always thought it was meant to be the other way round🤷 I do think Nissans claimed "6l/100km" is a bit fantastical 😂
    • Does exhaust manifold get hot as turno exhuast side? I have a turbo cover to managr heat in the engine bay but  nothing is covering the exhaust manifold before turbo   i know as turbo does compress air, the temp does go up however does that mean exhaust manifold would be as hot?
    • It's excellent but I'm still breaking it in so I'm not 100% sure where it'll end up. I would say it's about 15% heavier than stock and the smoothness of the slip zone is quite progressive but you need to be a little patient compared to stock or it'll bite hard and stall. Stock I got away with absolutely horrid clutch control. Like I said before I couldn't even tell where the clutch would grab when it was stock so releasing way too quickly without enough revs it would just slip and the revs would drop lower than ideal but that would be the end of it. Currently there's a bit of a nasty clutch judder if I don't apply enough revs + find the exact wrong point of the slip point in the clutch pedal but it feels like it's slowly resolving as I drive it more. I would not recommend the competition clutch unless you really need the extra clamp force. I think this clutch combined with the Nismo operating cylinder is going to be exactly what I want. Enough bite that you need to remember the release point to avoid stalling or rough shifts, but progressive enough that it's not hard to drive by any means and not heavy at all. I tried a "super single" clutch on my friend's 997.2 Turbo 6MT and that was absolutely horrid. It runs an electrohydraulic power steering pump for the clutch power boost so there's zero feedback in the clutch pedal and there was a horrific clutch shudder well after break-in due to the lack of marcel springs or hub springs in the friction disk. It felt like the slip zone was the thickness of a single toe twitch as well so it was almost impossible to avoid stalling it unless you gave it a ton of revs and just dumped the clutch instead of trying to be smooth with it. I was terrified of pulling out in front of traffic. I have also tried some kind of "super single" on an EK9 and that makes this twin plate Coppermix look like a stock clutch. Releasing the clutch pedal even slightly too quickly feels like you're getting rear-ended. The pedal is extremely heavy as well and there's no vacuum assist like the GTR.
×
×
  • Create New...