Jump to content
SAU Community

Recommended Posts

This recent sydney heat has had an impact on the smooth/responsive feel of my car.

Obviously 9psi boost has turned into more like 7 or 8 due to the heat, which i expected.

I'm using the stock intercooler (R33 - 3inch full exhaust - pod - turbotech set at 9psi)

The car has stalled on cold start 3 times on the 3 recent hot days, and the idle was playing up a bit while driving, dropping way too low (will look into cleaning aac valve soon).

Also, the car seemed alot less responsive, less willing to pick up on demand, kind of running rougher.

Never had any of these issues before the heat. Since it's cooled down again, everything seems fine.

My question: Is all this related to the hot weather? If so, will a fmic fix this?

Link to comment
https://www.sau.com.au/forums/topic/139057-is-the-hot-weather-to-blame/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

yeh, in hot weather my line turns into a freggin corolla.

lol great, take one skyline, some extreme heat, mix together vigorously, and you get one corolla.

what about the stalling? my car always starts first go, i barely have to look at the key and it's rumbling nicely.

but the last time (sat), i was cranking it over forever, and on the 4th attempt it started.

i had a cooler on my 33 and went throught the same shit munkeh... so i have a two part answer to your question:

a) cooler makes little, to no difference on start up problems... and

b) you should have a cooler anyways, can runs so much better with one

turboz just dont like the heat... i used to find that on really hot days, it just didnt have the low down pull i usually had

an intercooler wont help you much at all. its just going to act as a heat soaker when your in traffic. since your in sydney, this would be more then likely the case. on that note, my car also feels like poo lately especially in the 30+ degree's we've had here in the last few days.

k, well i feel a bit better now, knowing you're all suffering with me :(

so you reckon the cold start problems might have been related to the heat. maybe from the previous day's heat abuse or something?

best way to get decent performance in summer is a waterspray intercooler jet. I have had great sucess with this.

I had a cefiro a couple of years ago that was set up for drift and saw a lot of track work in summer and it was also my daily driver.

I had a temp probe lust before the throttle body to measuer intake temps.

When I first got the car in summer with the stock cooler I saw temps of 60deg + then I put the FMIC on and saw an drop of about 10 to 15 deg.

but I was getting pinging on really hot days. so I decided to fit a waterspray system. All it really was was a windscreen washer motor/bottle with a hose going to the front of the cooler that directed 4 water mist nozzles on the front of the cooler. It had a check valve to stop it from siphoning out of the washer bottle. It was triggered by a pressure switch from an old washing machine that was set to 4psi.

As soon as you started to boost it the system would switch on and spray water in a fine mist onto the cooler. It was amazing it dropped intake temps to about 5 to 10 deg above ambient. and stopped the engine from pinging. I am going to do the same mod this summer on my new car and will do a writeup for those interested. All up it cost about $70 for the patrs and a bit of fiddling but its a really good mod. you just have to remember to fill up the bottle every time you fill the car as it only lasts for about a 300k's with spirited driving on a small scource.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...