Jump to content
SAU Community

Recommended Posts

on my new engine, i am runnning a new thicker radiator with standard shroud and engine fan, also front mount and the performance in 30+ degrees is still good. water temps are down, which in turn keeps everything under the bonnet that bit cooler. I would recommend covering the basics i.e. good cooling system and intercooler before setting up some sort of spray system on a daily car.

Having said that, you should still keep the boost low on a real hot day on your daily just as a common sense thing.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Once engine coolant temps get up the ecu begins to retard ign. timing. :O

Unsure what coolant temp that is on the stock ecu but on the R33/R32 GTST pfc's its from 80degree's.

The GTR PFC begins retarding ign timing from 90degree's.

Regarding the stock temp guage.

The stock water temp guage is basically a 3 stage. Cold, operating then HOT.

For example mine see's half at ~70 degree's right up to ~110degree's where it only just starts to move up towards the H.

On hot days in traffic without the a/c on I generally see around 90degree's. With the A/C on in traffic it gets up around 95 and has seen 100degree's on those 40+degree days. Once the traffic gets moving temps quickly come back down to around the mid 90's.

I've never had any issues with heatsoak and what not. BUT I still run the stock airbox and have a great big dirty 100mm cai entering the box from the left inner bumper.

best way to get decent performance in summer is a waterspray intercooler jet. I have had great sucess with this.

I had a cefiro a couple of years ago that was set up for drift and saw a lot of track work in summer and it was also my daily driver.

I had a temp probe lust before the throttle body to measuer intake temps.

When I first got the car in summer with the stock cooler I saw temps of 60deg + then I put the FMIC on and saw an drop of about 10 to 15 deg.

but I was getting pinging on really hot days. so I decided to fit a waterspray system. All it really was was a windscreen washer motor/bottle with a hose going to the front of the cooler that directed 4 water mist nozzles on the front of the cooler. It had a check valve to stop it from siphoning out of the washer bottle. It was triggered by a pressure switch from an old washing machine that was set to 4psi.

As soon as you started to boost it the system would switch on and spray water in a fine mist onto the cooler. It was amazing it dropped intake temps to about 5 to 10 deg above ambient. and stopped the engine from pinging. I am going to do the same mod this summer on my new car and will do a writeup for those interested. All up it cost about $70 for the patrs and a bit of fiddling but its a really good mod. you just have to remember to fill up the bottle every time you fill the car as it only lasts for about a 300k's with spirited driving on a small scource.

Firstly,

How did you get the washing machine into an engine bay? :(

And the way I drive I would need a 20 litre tank of water for my FMIC so, :(

Put the washing machine in the back seats and the 20 litre of water in the front passenger seat.

That way you can wash your clothes and not get thirsty .

:(

Mine said half when I hit 109 on the track the other day.

Its quite scary how quickly it goes from half to the H.

A 3 stage stock temp guage is good, nothing worse than a swaying temp guage. :(

109degree's is ok, over 120-125degree's is where the coolant begins to boil. :S

yes, when you're on boost in the stinkin summer heat.

but how does this help coolant/engine temp?

is it a combo of both that's causing grief in the heat?

Edited by Munkyb0y

Ok ive possibly got the answer for your hard starting issue. I was recently at a work training course for EFI diagnosis. If the day/s before you try to start the car is a real stinker the ECU will record all this data and have the system set accordingly. If then you try to start your car the next morning in a cool condition/engine IE:garage/shade/early morning it is more than likely going to have trouble starting with the new data the ECU has logged from hot daily driving. To see if this theory is correct try pulling out the ECU fuse for a few minutes to reset it.

Hope this helps

Deren

now that's an answer. sounds quite plausible to me.

and that's exactly how it happened. parked it right after a 1hr drive in the stinking heat. started it the next morning in much cooler temps, inside a garage, in the shade.

:)

here's a theory about CAI. it's not my theory, but makes sense to me.

i'm sure it was mad082 (prease confirm) that said this in a thread somewhere.

intake air goes through the turbo where it proceeds to get hot, because the turbo is hot. so cool air or warm air will turn to hot air anyway.

so isnt it better to have an unrestricted pod that can take in as much air as it needs, rather than reducing it's supply of air by boxing it, in the hope of reducing temps by a couple of degrees?

mad082, correct me if i got it wrong.

Apparently for every degree you reduce the intake air temperature you gain 1 Hp. The pod filter shroud is probably more beneficial on a non turbo engine as they dont have/need intercoolers.

Just because the turbine is stinking hot doesnt mean it will directly heat the charge air to the same temperature. The air rushes through there so fast it would barely be heated by the turbine next door. Its the compression of air that causes friction between atoms which in turn causes alot of the increased heat.

The air rushes through there so fast it would barely be heated by the turbine next door. Its the compression of air that causes friction between atoms which in turn causes alot of the increased heat.

Thanks Godzilla, i thought i was going crazy! "turbo heating air due to radiant" :mellow:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...