Jump to content
SAU Community

Recommended Posts

on my new engine, i am runnning a new thicker radiator with standard shroud and engine fan, also front mount and the performance in 30+ degrees is still good. water temps are down, which in turn keeps everything under the bonnet that bit cooler. I would recommend covering the basics i.e. good cooling system and intercooler before setting up some sort of spray system on a daily car.

Having said that, you should still keep the boost low on a real hot day on your daily just as a common sense thing.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Once engine coolant temps get up the ecu begins to retard ign. timing. :O

Unsure what coolant temp that is on the stock ecu but on the R33/R32 GTST pfc's its from 80degree's.

The GTR PFC begins retarding ign timing from 90degree's.

Regarding the stock temp guage.

The stock water temp guage is basically a 3 stage. Cold, operating then HOT.

For example mine see's half at ~70 degree's right up to ~110degree's where it only just starts to move up towards the H.

On hot days in traffic without the a/c on I generally see around 90degree's. With the A/C on in traffic it gets up around 95 and has seen 100degree's on those 40+degree days. Once the traffic gets moving temps quickly come back down to around the mid 90's.

I've never had any issues with heatsoak and what not. BUT I still run the stock airbox and have a great big dirty 100mm cai entering the box from the left inner bumper.

best way to get decent performance in summer is a waterspray intercooler jet. I have had great sucess with this.

I had a cefiro a couple of years ago that was set up for drift and saw a lot of track work in summer and it was also my daily driver.

I had a temp probe lust before the throttle body to measuer intake temps.

When I first got the car in summer with the stock cooler I saw temps of 60deg + then I put the FMIC on and saw an drop of about 10 to 15 deg.

but I was getting pinging on really hot days. so I decided to fit a waterspray system. All it really was was a windscreen washer motor/bottle with a hose going to the front of the cooler that directed 4 water mist nozzles on the front of the cooler. It had a check valve to stop it from siphoning out of the washer bottle. It was triggered by a pressure switch from an old washing machine that was set to 4psi.

As soon as you started to boost it the system would switch on and spray water in a fine mist onto the cooler. It was amazing it dropped intake temps to about 5 to 10 deg above ambient. and stopped the engine from pinging. I am going to do the same mod this summer on my new car and will do a writeup for those interested. All up it cost about $70 for the patrs and a bit of fiddling but its a really good mod. you just have to remember to fill up the bottle every time you fill the car as it only lasts for about a 300k's with spirited driving on a small scource.

Firstly,

How did you get the washing machine into an engine bay? :(

And the way I drive I would need a 20 litre tank of water for my FMIC so, :(

Put the washing machine in the back seats and the 20 litre of water in the front passenger seat.

That way you can wash your clothes and not get thirsty .

:(

Mine said half when I hit 109 on the track the other day.

Its quite scary how quickly it goes from half to the H.

A 3 stage stock temp guage is good, nothing worse than a swaying temp guage. :(

109degree's is ok, over 120-125degree's is where the coolant begins to boil. :S

yes, when you're on boost in the stinkin summer heat.

but how does this help coolant/engine temp?

is it a combo of both that's causing grief in the heat?

Edited by Munkyb0y

Ok ive possibly got the answer for your hard starting issue. I was recently at a work training course for EFI diagnosis. If the day/s before you try to start the car is a real stinker the ECU will record all this data and have the system set accordingly. If then you try to start your car the next morning in a cool condition/engine IE:garage/shade/early morning it is more than likely going to have trouble starting with the new data the ECU has logged from hot daily driving. To see if this theory is correct try pulling out the ECU fuse for a few minutes to reset it.

Hope this helps

Deren

now that's an answer. sounds quite plausible to me.

and that's exactly how it happened. parked it right after a 1hr drive in the stinking heat. started it the next morning in much cooler temps, inside a garage, in the shade.

:)

here's a theory about CAI. it's not my theory, but makes sense to me.

i'm sure it was mad082 (prease confirm) that said this in a thread somewhere.

intake air goes through the turbo where it proceeds to get hot, because the turbo is hot. so cool air or warm air will turn to hot air anyway.

so isnt it better to have an unrestricted pod that can take in as much air as it needs, rather than reducing it's supply of air by boxing it, in the hope of reducing temps by a couple of degrees?

mad082, correct me if i got it wrong.

Apparently for every degree you reduce the intake air temperature you gain 1 Hp. The pod filter shroud is probably more beneficial on a non turbo engine as they dont have/need intercoolers.

Just because the turbine is stinking hot doesnt mean it will directly heat the charge air to the same temperature. The air rushes through there so fast it would barely be heated by the turbine next door. Its the compression of air that causes friction between atoms which in turn causes alot of the increased heat.

The air rushes through there so fast it would barely be heated by the turbine next door. Its the compression of air that causes friction between atoms which in turn causes alot of the increased heat.

Thanks Godzilla, i thought i was going crazy! "turbo heating air due to radiant" :mellow:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh... literally every time i jump on a forum, see an instagram post or see an engine bay at a car show, i get an idea and add it to my 'to do' list. So what started off as, hey can u just make a couple of intake hard pipes because my dumbass bought the wrong apexi kit, blew out into a 2 week job including braided brake lines & custom bash kit for the front lip haha.  Getting Luke from A4E engineering to make a full custom exhaust with a controllable aes dump valve so i can actually switch between quiet and loud, because right now its just loud all day every day. Then after that go and get the tune redone flex e85 & 98 as i get bugger all milage from e85, makes going for longer drivers difficult
    • Car looks clean as. You ended up getting quite a bit done 😂  So what's the plan for the exhaust? 
    • The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
×
×
  • Create New...