Jump to content
SAU Community

Nismo Racing Stripes Copy For $165 + Post


Recommended Posts

hi,

I recently purchase nismo racing stripes off an overseas supplier for $200 and I am pleased with the product.

Asside from the side stripes being slightly shorter, about 10cm.

seeing the number of interest. I have decided to organise a group buy for everyone. the cost gone down to $165

the package includes

the side stripes, $120

the bonet stripes and $45

"nismo" stickers, either black or white. comes free if you buy both above...

This price is however good only if 10 people is interested. I'm trying to obtain a longer version so it's not short...

I will post pictures on my car ASAP, please message here or Pm me for those interested

1. Satanic (Side stripes + Bonet Stripes + 2x Black Nismo) R34 GTT

2.WLDCRD (Side stripes + Bonet Stripes + 2x white Nismo) R32 GTR

3.syd33 (grey white red side stripes + bonet stripes + 2xnismo)R33

4.180 mph (side stripes) R32

5. ToPaz (side stripes + Bonet Stripes + 2x White Nismo) R32 GTR

6.kralster (Side Stripes + Bonet Stripes + 2x black Nismo)R34 GTT

7.Russman (Side stripes) R32

8.Ol Mate (red white black side stripes + bone stripes + 2x Nismo) R33

9. R32-25t (red white silver)r33

10.

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Im in, did they specify if they were for R32, R33 or R34? because I think the R32 side stickers at least are shorter than R34 side stickers.

Can we get some pics of yours?

pictures:

I used the Trust sticker to fill in the gap, the one shown in the picture is the approximate legth the sticker is short to fit R34, R33 is even longer than R34 so... I'm working on this problem...

also note that the carbon fibre look nismo does not come with the package, only the white ones on the bonet

post-23806-1161164402.jpg

post-23806-1161164419.jpg

post-23806-1161164549.jpg

post-23806-1161164586.jpg

post-23806-1161164611.jpg

post-23806-1161164632.jpg

post-23806-1161164654.jpg

post-23806-1161164685.jpg

post-23806-1161164715.jpg

post-23806-1161164738.jpg

updating,

I received an e-mail from supplier,

he is willing to reduce the price to $165, thanks to my good negotiating skill =P

also willing to lengthen the sticker length..This offer however is only untill the end of this month..please hurry

Ooh umm I'm in Perth so you have to take into consideration mailing to you guys..I've never done this before no idea how much~~

SKY 34; those stickers look fantastic! So keen to get my hands on these! Is it possible for the guy to do something about the "nismo" stickers as my bonnet is white :dry:

Also; postage - poster tube buddy :P

Satanic: yes the nismo comes in white and black..I'll order the black ones for you

West: the decals comes with these three standard colour.... the side stripes goes for $120 I can get you other combination but will cost more..

I can get my contact to make the mines decals for $150 these are only side stripes, no bonet decal or the mines signature..Maybe I can get you discounted price..I am not sure as the supplier only promise me better rate for Nismo decals...

yo!

How do these come in? are the side stripes one piece the whole way? I got mine made but they were not perfect so I took them off...tempted to get these if they are one piece...

n15m0: yes it's one piece the whole way, so you need to cut the stripes yourself at the door panels

Munkyb0y: umm I think you can get the nismo decal really cheap in E-bay..I could ask for the nismo logo, but I think it'll be cheaper if you buy off e-bay

A couple of tips:

Cut the vinyl at the edge of the panels don't wrap it around, it will eventually come off and depending on the quality of the vinyl may not even like going around corners.

When polishing your car with them on use masking tape over the vinyl so the edges don't get filled with polish. you can get it out its just very annoying and you risk damaging the vinyl.

Look up some vinyl install instructions on the web and don't worry if you get very tiny bubbles under the vinyl, they will disappear in a couple of days in the sun.

I have been cutting some graphics for my own car. I will post pics once I have it completed, hopefully this weekend...

Munkyb0y: umm I think you can get the nismo decal really cheap in E-bay..I could ask for the nismo logo, but I think it'll be cheaper if you buy off e-bay

fair enough, if they're the same kind of quality, i agree.

pictures:

I used the Trust sticker to fill in the gap, the one shown in the picture is the approximate legth the sticker is short to fit R34, R33 is even longer than R34 so... I'm working on this problem...

also note that the carbon fibre look nismo does not come with the package, only the white ones on the bonet

are you able to get the bonnet decals but in a larger fatter version like the one in the pic below? also after the red, white, grey instead of the black, thanks

post-24902-1161329725.jpg

Edited by thirty four
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
×
×
  • Create New...