Jump to content
SAU Community

Recommended Posts

guysss

if any one has a problem with there dash lights

i figured out my problem and fixed

after 2 hours of blowing fuses and electric shocks with my cousin.. i figured

wtf... il bypass the switch all togeather and hard wire the wire sto each other

this seemed to work..

but my antena still doesnt work!!!!

could be my head unit me is thinking

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/
Share on other sites

make sure the plug goes behind the deck for the antenna is plug in... if this comes loose then your antenna will not come up..

once this is checked and it is ok, then i beleive the motor in your antenna is stuffed.. happen with me, just replace the antenna dude...might set you back $55 for an auto antenna.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-278408
Share on other sites

PUSHEAD - sorry to say, YOU ARE 100% WRONG.

Even in your thread that refers to preditor666's thread, he clearly states:

" The slashed ones are the stripey ones in the two colours.

Green/red - Power Antenna up/down "

When the radio is turned on, it sends a +12V signal to power antena. This triggers a relay which uses a separate 12V line to power the motor up or down. Ground is via body. If you are using the tape deck or cd player there is no voltage on this wire, thus the antena remains down.

Zdenko - Did your inital problems come about by themselves, or did you install a new head unit (or something else) and then the problems presented themselves?

PS: Please PM me once you have answered the question, so that i can respond, as i may forget to revisit this thread. Also include the thread title.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-279892
Share on other sites

hmmm...don't hard wire stuff! Its a quick and dirty solution, and what happens if you do get a short.. BZZTT who knows what u could blow

Something I discovered last night (after being pulled over by the cops.. oops :).. the tail lights are on the same circuit for the dash lights (speedo, etc). The "tail light" (10A) fuse in the back fusebox is the same circuit for the speedo/tacho, dash lights

Also: many plugs need to be closed or you'll get open circuit and other things attached to the circuit may not work. Disconnect the hazard button plug and you'll notice that your indicators no longer work!! (i discovered this yesterday too... ooops :P but didn't get pulled over for that one)

hehehe: thanx Al :( yup, i think thats pretty much how it all works, so check the separate fuse for the aerial. I think its in the boot fusebox.

The antenna control wire simply is 12v which triggers the motor circuit to go up or down (toggle). Make sure its connected, or otherwise rigged to ACC or connect your own switch.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-282961
Share on other sites

lol whats wrong with hard wireing??

lol it works??

nah i think my switch is stuffed

so if any one is recking there skyline

i want ur switch!!

ahah

but yeh the anntenna i was ment o have a loko at that yesterday but ran out of time...

had my gf calling me to pick her up from work!!!

farken chicks

they al hate city driving!

i wish i cold hard wire her off a bridge!~

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-282978
Share on other sites

switch ? hmmm.. Mine doesn't have a switch?? You talking about the instrument cluster or other parts of the dash above the stereo? I know some have a dimmer knob for the instrument lights..mine doesn't look like it ever had one.

a'hrm.. look whos angry at somebody :)

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-282989
Share on other sites

So is your antenna working know?

Originally posted by predator666

hmmm...don't hard wire stuff! Its a quick and dirty solution, and what happens if you do get a short.. BZZTT who knows what u could blow

Please explain, as i work as a electronic feild technecian and consider soldiering and covering with heat shrink to be the best and safest way to connect wires.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-283937
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...