Jump to content
SAU Community

Recommended Posts

nope none above the manifold ,rocker gaskets are new not a drop from that area ,just from that exhaust outlet.can thing of anything else that will let oil out in that area but the pistons,please prove me wrong with another theory!

I have the same thing. It appears to be leaking oil from a broken/missing stud. A friend pointed out some oil from my rocker gasket and suggested that it's just running down the back, and then around that last manifold pipe.

I dunno.. I recken i've got a tiny leak there, but my pressure and temps are fine, and it doesn't lose oil.

I HAVE heard that if you drill too far into the hole to get a broken stud out, that you can go too far and puncture into the head fairly easily. Either way, with a new stud in there, it should seal that hole up pretty well I think!

Hopefully i'll be getting all new studs in the next few weeks.

post-13324-1161593258.jpgpost-13324-1161593127.jpgwhats the easiest way of finding out ?? if it was leaking that much oil through the piston rings what other symptoms would there b?

i took out 2 of the closest sparkplugs near the area do they tell any tales?

Edited by boomtheroom
whats the easiest way of finding out ?? if it was leaking that much oil through the piston rings what other symptoms would there b?

i took out 2 of the closest sparkplugs near the area do they tell any tales?

Does your car chew up oil? could be your piston rings are gone-ski and to make things worse, some of your exhaust is leaking out from area with the missing bolt...

Looks like that spark plug has been burning oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My crystal ball says that when they replaced the pads, they didn't replace all of the brake hardware (could be a missing shim, pin, spring, etc).  Finding a low dust pad should be very easy. Have a google for things like, low dust / soft pad compound / easy on rotors. Your dust primarily comes from the rotors getting eaten up by the pads. 
    • I think old mate is going to continue to hold out for awhile at that price
    • OBD1 is a catch-all term for pre-OBD2 which could have basically any connector design and protocol. I really don't understand this attitude against using data logging for issues that can be multi-causal and subtle. A no-start situation or something like that sure the scan tool does nothing but if it runs like shit it can often be a sensor issue. When a friend of mine reliably had issues with his N54 not able to stay running eventually I narrowed down the issue to a faulty fuel pressure sensor. Only way I could do that was a scan tool to look at the fuel rail pressure and see shadow codes for fuel pressure. Then check against a pressure gauge. Is reflexively firing up the data logger probably a bad habit? I guess, it can encourage people to not listen/observe but on these old OBD1 cars just taking a log really doesn't do anything by itself. You still have to synthesize everything you know and think about what it all means.
    • https://www.carsales.com.au/cars/details/1999-nissan-skyline-gt-r-v-spec-bnr34-manual-4wd/OAG-AD-24005316   i reckon some former Skyline owners are wishing they held out a little longer before selling up?
    • Yeah saw that video on YouTube. But he got a R grade (repaired) high mileage model and proudly advertised the fact it was super cheap and no doubt with issues. I wouldn't be going the cheap and nasty route.
×
×
  • Create New...