Jump to content
SAU Community

Recommended Posts

I'll see how I go, Haven't touched the sump yet, it still needs a fitting welded into it for the oil drain but I have to clean the thing first, its a mess and full of sludge etc.

Have to work out whats happening with the Intake cam. I have one cam cap that stops the cam from turning, another one is a little tight but the cam still spins, other then that it spins beautifully. Exhaust cam is fine, so not sure how 1 out of 14 cam caps is so bad. Not sure what I'm going to do about it yet

Just talked to the guy I got the head off, said the cam caps might have got mixed up which would explain why I have 2 that are tight, look offset towards the intake side a little, so hopefully he can find the othes otherwise the caps will have to get skimmed and line bored

I'm about 90% sure that they are stamped with numbers so it shouldn't be too hard to get the right ones.

It really sucks that they were mixed up though, that's a big no-no, makes the head neary useless without expensive machining.

Oh yeah, they are all stamped with their position. But I4 and I2 are tight and the guy I bougth them off had two engines/heads apart at the same time so hopefully they just got mixed up from 1 head to the other and he can find them, will be the easiest and cheapest fix.

These things happen but, I suppose when the time comes I'll have to see whats cheaper - a new head or line boring mine

Got some Nissan bits today, nothing to exciting but necessary all the same.

Had a play with some wrinkle paint today:

20121025_185315.jpg

Think I'll go with this on the intake manifold, but think I'll just keep the cam covers a flat paint job.

Where did you get the wrinkle paint from, Callan? I gotta paint my plenium and covers too. Any variaty of colours?

I got black wrinkle paint from repco (auto barn was sold out of black and only had red) these are the only two colours I saw. I just did the wrinkle black and then painted silver engine enamel over the top. Hopefully the Plenum will look like a genuine Greddy when I'm done

Why Hello:

20121027_174935.jpg

Things seem to be coming together all of a sudden, instead of one problem after another lol. Going to work out the compression ratio in the next few days. Going to be alot of screwing around to work it out but I guess you get that :)

Ordered my Hypergear turbo today, looks like it will shoot over 300rwkw on 98 and 350rwkw on E85 (when that gets here) but its a pretty experimental turbo at the moment so just have to wait and see. But I think I'll be less disapointed then i was with the HKS Turbo I'll put it that way :)

6boost jake.. they do hi mount aswell. i can source a high mount similar style and quality for around 850 for a 20/25

A 6boost for that price? Or just same style?

Well I'm after a new head now. Going to be too much hassel to fix up the 2 cam caps that don't match

Can never be to sure :P

someone told me before I bought the 6boost that It should only cost 850ish but I had to pay more, so was wondering if I was just looking in the wrong places

6Boost have never been under $1000 to my knowledge

Has anyone else seen that grey GT-R getting around? I've seen it twice now, 1 time just north of the Forgan bridge then the other at night on Slade pt road.. I have a feeling it lives at Sladey. My god it's sexy.

6boost jake.. they do hi mount aswell. i can source a high mount similar style and quality for around 850 for a 20/25

I'd be after a lowmount for a rb25det but need to save some pennies first...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
×
×
  • Create New...