Jump to content
SAU Community

Recommended Posts

Any particular reason u going jun kingy ? I was looking at a nitto stocker kit..... I know the jun head package is awesome so go without saying the stoker kit be just as good �

We run over 1200 engine HP and 8.52sec pass with a JUN Billet Crank and Rods with Custom CP 86mm Pistons, Head is all Top Shelf Tomei Valvetrain with Custom 295x11.5mm JUN Cams. Very reliable engine package plenty of proof it can handle anything :). Mark has got good numbers out of his Custom Nitto 3.2L approx. 1800HP full drag spec but. Both good kits.

I'm slowly starting to collect all my GTR parts if anyone knows where I can pick up a cheap RB26 either whole, block/head don't care. I'm gonna strip the engine and rebuild it anyways, a blow up engine would be perfect.

I'm slowly starting to collect all my GTR parts if anyone knows where I can pick up a cheap RB26 either whole, block/head don't care. I'm gonna strip the engine and rebuild it anyways, a blow up engine would be perfect.

http://www.ebay.com.au/itm/RB26-Block-GT-R-Skyline-/221186483264?pt=AU_Car_Parts_Accessories&hash=item337fbde440&_uhb=1

What do you reckon? If you're rebuilding anyway, could be worth a look :)

Problem solved just had to double check/confirm that RB26/30 will fit under R32 GTR Bonnet without hitting. Looks like it does with minimal mods, which is good as I have 2 x RB30 Blocks sitting in the shed :yes: just need a 26 Head.

I'm just slowly collecting parts for a build not planning on starting in the near future.

I went with JUN for a few reasons. Their quality is second to none and has been proven in the Earls 32. It is a full billet crank where as Tomie and HKS are forged and it came at a good price at the time. The other options i looked at were BC and Nitto. JUN 2.8 crank weighs 21.5kg and rated to 1000hp and 9000RPM. Im not too sure how the others weigh up.

My 34 is Alive again!! Take it off the stands tomorrow give it a wash and prepped up for a trip to Bris next week for a tune and E85 can't wait!! :)

I'm just slowly collecting parts for a build not planning on starting in the near future. I went with JUN for a few reasons. Their quality is second to none and has been proven in the Earls 32. It is a full billet crank where as Tomie and HKS are forged and it came at a good price at the time. The other options i looked at were BC and Nitto. JUN 2.8 crank weighs 21.5kg and rated to 1000hp and 9000RPM. Im not too sure how the others weigh up. My 34 is Alive again!! Take it off the stands tomorrow give it a wash and prepped up for a trip to Bris next week for a tune and E85 can't wait!! :)

Next week we have our sprints at Lakeside Park. Feel free to come by and watch :)

If all goes well i will be on the road wed arvo headed back home. Don't think there will be much spare time as we have to get back for work. Thanks anyway appreciate it.

Got the kit on the group buy here on SAU a also got a few other quotes and it was a fair bit cheaper than anywhere else.

farrrrking pizza hut car park at 4 ways will be the death of me. Which idiot decided to outline the car parks in big f*ck off slabs of concrete.. put a big dent in my front bar i missjudged how much space i had.. north coast customs should be able to pull it out. Just what i need when i'm trying to sell it. Ughh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
    • @KinkstaahKrinkle paint the "silver" alloy, not the red filter frame Engine bay heat won't be a issue worth worrying about as the silver alloy blocks it off on 3 sides, as for the top, the bonnet seals most of it and the big OEM CAI intake snorkel is still fitted in its original position  I will head into Clark's Rubber when I have some time to grab some pinch weld to tidy up the alloy after I paint it As for performance, I honestly wasn't expecting any, the only reason I got it is because the intake noise sounds cool to my old ears when I'm feeding it the beans Sometimes it's the silly things you do in in life that gives the most fun, and I do love anything that makes cool car noises In other news: I survived 4 nights at sea with Jackie not throwing me over board, holidays are continuing now as we are currently chilling at the Beachcomber in Toukley, after taking the coast roads from Sydney in the MX5, top down all the way, Toukley is where I spent a good deal of my youth holidaying during the summer months, there's lots of reminiscing going on,  and lots of beaches and old houses to visit Next on the list is to head to Batemans Bay for a few days, but we will take the Commodore out to stretch its legs, then Commodore hasn't really moved for months
    • There’s probably people who’d like to do it and then when it comes to putting their hands in their pockets they’ll all disappear into the shadows 
×
×
  • Create New...