Jump to content
SAU Community

Recommended Posts

more boost you run, later the gate will be open remember...

Mine came open around 4200-4500rpm on the RB25 load depending.

I doubt it'll be "heaps" earlier. You might come close to 4000rpm, but it wont be 3500rpm unless your going 3ltr.

For the power figure your aiming for, there is no need to go single, considering the stuffing around with water/oil lines, air intake, blow-off valve return piping etc....

If you want over 400rwkw, then yes go single, but also look at more displacement for response...

Its a proven combination for track, 2.6 + twin low mounts = good power and response...

Twins will keep the boys in blue off your back aswell...

Beer Baron

If you're after only 300rwkw and good response from 3500-4000rpm then go twins for sure - GT-SS's, 2680r's etc

I had a T78 on my rb26 and it was very laggy (good power from 4800-5000rpm) so I don't think this will suit your purposes.

Have a TO4z now and response is better. It comes on boost quicker with a more linear power delivery (compared to the 'light switch' T78) with good power from around 4300-4500rpm.

If you really want a single than go for a smaller one like the GT3040 as Gary suggested.

As JAGR33 suggested, increase displacement and then you can have your BFOT and response and a cake to eat too :)

thanks for the input. good to get the SAU brains trust on this one.

nick, you are right, HKS GT-SS are the proven option and very good value at $3K, but you do need to factor in twin dumps and front pipes which would be much cheaper on the SST set-up with just one simple dump, and one simple front pipe.

Gary, I hear you on the 2530s too. They would be my other choice I think.

Morgs, I will heed that advice and put the T78 in the BFOT bag. but definately considering one of the small T04Zs.

What housing A/Rs do they come in (both ex and comp).

Something around .81 rear and a .60 front could be good depending on physical size/wheel size/trim. Should be good for 350rwkw and hopefully full boost before 4000rpm. basically whatever turbo I end up with I'd want the wastegate (s) cracked open before 4000. otherwise it's not really going to do it for me on street or track for that matter.

Ok, lets consider the dump pipes and front pipes then, you can still have the HKS turbo kit with stainless front pipes and dump pipes, all brand new for under $4,000 all up - And while we are at it, dont forget all the other fittings and connectors that will be needed with the single conversion, the cost on using high grade fittings and lines add's up very very quickly as you know.

some real good advice here, i think i might now just stick with the low mount option on my budget as i worked everything i needed would cost shit loads! but dam good topic

Dam i wanted to go BFOT for track in the form of T04Z (and like to drive my car around it looks like stock under the bonnet at the moment) but after adding for all the extra parts i just went with 2530s my car is running 1 bar thought stock front and dumps with stock cams and is still making 250awkws on a marine dyno.

Not only that i can keep everythink simple i have nismo AFM and Nismo fuel pump which sould be good for the 350awks when i finaly finsh the car

I absolutely love TO4Z's. Imo, perfect single without going overkill. Also, Dave's engine is stock 200,000km and not quite set up for a big turbo.

Baron, HKS 3240('s) will be good fun :)

When would you see full boost with a to4z that dave is sporting? Did someone say he had a .6x rear? and what sort of power too?

I have a t04z w/ .84rear i think it is sitting in a box at home waiting to replace the 3540...garden variety ofcourse...couldnt justify the extra 1800 bux on the HKS version. But im thinking the housing is too big for track car...

Edited by r33_racer

I'm pretty much always wrong, so bear that in mind... alas... I think you over budgeted for what a SST COULD cost, for those of us who have thought of it before for cost reasons.

GT35R ( ok, not that small, but GT30R would be about the same )

EBay GT35R

Less than $2000AUD.

I don't think I'd be paying $1500 for a manifold either.

So in the new cheaper budget, including Manifolds, Dumps and Turbo(s)

$2000 for Turbo

$1000 for Manifold (Even cheaper I reckon)

$600 for dump + front (Even cheaper I reckon)

$400 for intake

Thats only $4000. You'd get the same place to do all the manifold, dump/front and intake. I reckon it wouldn't be hard to rock up with your sub $2000 turbo and say, strap that on for under $2000 guys.

again... I've seldom made a good decision about car mods, so I see no reason to start having good ideas now... it just seems like a good one tho.

yeah I agree. if you forget about the japanese brand name parts the SST could be done a lot cheaper. but i'm a brand wanker. love the shiny boxes etc.

you could go Garret turbo ~$2K

6 boost manifold ~$1K

dump and front pipe ~$400

intake piping ~$400

oil and water lines ~$150

away you go :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
    • Remember reading about this not too long ago. been for sale for a long time  this is like when the wife says you need to sell the car so you put it up for a ridiculous price no one will pay
    • You are perhaps suggesting that it is not a super car? Well....it's not an AU.
    • Dropped the MX5 of this morning to get the hardtop colour matched and some PDR done, they are also going to give it a buff to remove some "stubborn" swirl marks and light scratches in the clear coat Over the last few months the poor little thing has copped some shopping centre car park abuse, I try to not park in them, but hitting Westfield's a few times over the last few months has taken its toll, nothing really bad, but enough of a trigger for a "while we're in there" thingie  Once it's back and all the one colour, with a few dents and mark's removed I'll give some of these products a go and see what they're like  
×
×
  • Create New...