Jump to content
SAU Community

Recommended Posts

"i dont wanna have to make it a Nissan Highline just to get it past the pits tho."

you dont want to but if u want to pass u mite have too.. part and parcel of owning a hpi. do wat you gotta do, hell return it to dead stock if u have too den go to welshpool or o'connor/myaree and pass first time. saves u grief.

like dey say do it once do it right.

here's another thing. suck up. do wat dey say dont argue and for ffs dont b cocky and think ur all dat. dey deal with this shit everyday, and to them ur another one.

just my 2c. (yes, i frequent the pits a hell of alot)

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i dont get it? how does having faded/silver windscreen wipers make your vehicle unroadworthy? thats the biggest load of shit ever :S

Its called ADRs, wipers etc should be non reflective - you cant beat adrs, unless you get an engineers report.

100mm is legal, I actually passed my car over welshpool pits slightly lower than 100mm (ie, it scraped when it went over) but the guy there thought it was close enough and let it slide

I also passed welshpool with coilovers - I really dont trust outstation pits, unless its pretty much stock, they dont like passing anything.

We have had to change the same bushes on a car 3 times. Then after telling us what a POS it is, he could only find 1 door handle you had to fiddle with to get open. If they don't want to pass you, they will find something.

Pit day 2 = ARGH!

Failed. again. Nothng mentiond about the previous problems. Now my front indicators are 2 far in, and not high enough. So looks like im in shopping for a new front body kit :)

Did you go to welshpool? Those reasons are BS. What bodykit do you have?

Aye i went to Welshpool. A 32 was in front of me.. got a little asian guy inspector, passed him after like a 5 min expection. I was like pleeeeeeaseeee give me him, he probaly owned the GTR i saw in the parking lot :) Then i saw the inspector from kelmscott come out and im like ohhhh shit! I had my friends mum take my car thru, and lucky he went to some other guy instead of to me... then the asian inspector waved my friends mum to come forward so i watched from the seats at the side. Went around all the outside of the car and checked all the lights horn etc. He stopped at the front of the car and looked at my indicators and is like to the guy that failed me the first time (the old kelmscott guy).. they look okay to you? and of course he said no. i was like GRRR so i ran over and asked what the problem was. He explained my lights were to far down and to far away from the outside of the car. He also said that if my headlight indicators were working it wouldnt matter. I then told him that R33 indicators are not apart of the headlights and they are below the lights on the body kit. He just said it dont meet standards, and failed my car ;)

So ive done a bit of looking around on SAU and ive found a number for a panel beater so im gonna go in tomorrow and get a quote.

post-32545-1162284792.jpg

here's pic sorry about quality.

A 32 was in front of me.. got a little asian guy inspector, passed him after like a 5 min expection.

heys, dat was me in the skyline (if it was a white one, and if your 33 had a black fmic). the 5 minute job was a re-inspection.

btw on a side note wat colour was the gtr in the car park? i didnt c one...

We got told off for having 8 1/2 inch rims on a Commodore (back in Trev days) but then if it was a "HSV" or "SS" it would have been ok but it wasn't. Doesn't matter that they are exactly the same under there.

Then had tail lights checked on a 31 "they were too dull" but then next inspection I said "checked by an auto sparky and said they were normal" and the inspector says "oh they are fine". Grrr....

Can see why people get annoyed.

indicators are to be within 400mm of the side of the car i think..

i have a very similar model bar to yours, and this is where mine are mounted.

(in the right/left hand vents, up the top)

ADR 13/00 INSTALLATION OF LIGHTING

front direction indicators

no more than 400mm inboard of vehicle outer edge

at least 600mm apart

between 350 & 1500mm above the ground

visible 45 deg inward & 45 deg outward

visible 15 deg upwards & 15 deg downwards

(dont look at my front bar lol)

We got told off for having 8 1/2 inch rims on a Commodore (back in Trev days) but then if it was a "HSV" or "SS" it would have been ok but it wasn't. Doesn't matter that they are exactly the same under there.

Then had tail lights checked on a 31 "they were too dull" but then next inspection I said "checked by an auto sparky and said they were normal" and the inspector says "oh they are fine". Grrr....

Can see why people get annoyed.

vehicles are not supposed to have any variation to running gear from what came from factory with out engineers report

does not matter if the cars are identical , if the factory did not fit it then they can knock it back

Ive never been over the pits, but some of the reasons they give are just total BS. Things that affect car safety, ok, but indicators too far in, what the f**k does that even mean from a car owners POV? isnt that where the manufacturer put them?

these aftermarket front bars are made for looks only

the reasons are BS but the line needs to be draw somewhere

there are enough bad drivers out there that dont need any help from poorly designed body kits making it harder to see the safty equipment (thats what these lights are) than they need be

IMO

vehicles are not supposed to have any variation to running gear from what came from factory with out engineers report

does not matter if the cars are identical , if the factory did not fit it then they can knock it back

not quite, new federal standards allow quite significant variation in wheels sizes and also allow for variation of track up to +25mm without engineer certification.

My 17x9x10 inch rims passed over welshpool on an S13, and yes they did measure the wheels, check track, and check tyre size - all legal.

there are lots of changes to federal stds going on all the time

the problem is that the state authorities dont always know there has been a change unless someone informs them

also the guys at licensing dont know all the adr's and vsb's that are being developed, if you are aware of some change but you still get knocked back, its probebly because they are unaware and you need to inform the top bloke there (John Dombrose) of any changes to the regulations.

also comes down to the individual checking the vehicle, and he can knock it back for any reason he wants

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...