Jump to content
SAU Community

Recommended Posts

Why? cos they wanna sell more cars in America than they already are.

Last I heard the camry is the highest selling passenger car in the US and the third highest selling car overall.

More than likely they believe that being involved in NASCAR will help convince the southern rednecks that watch NASCAR (who usually wouldn't buy japanese cars) that Toyota ain't so bad.

The racing theme will also help their boring image considering they have no performance model in their US line-up as the article says.

Can't believe they have to use a 5.9 litre iron block carby V8 though. I knew they were bad but I didn't think NASCARs were that ancient. :)

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2612298
Share on other sites

NASCAR is the 2nd largest watched sport in the U.S behind NFL and generated 100's of millions of dollars in sponsorship...so Toyota are smart...big exposure in a huge U.S market. The cars may be 30 year old tech but NASCAR can teach all other motorsports a thing or two about success and how to keep the fans happy

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2619822
Share on other sites

parents have the 05 camry.

WORST handling car ever.. Apart from that, i love it!! much better on fuel than my line lol.. but two totally different cars anyways..

But good on toyota to enter.. They should start making the new supras already.

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2619876
Share on other sites

what are the going to do, run a FWD camry in nascar?? gold.

ps, yes i realise they will obviously use a purpose built nascar, with a toyota 'inspired' composite body. in fact the only toyota bit on the car will be the badge.

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2619884
Share on other sites

The cars may be 30 year old tech but NASCAR can teach all other motorsports a thing or two about success and how to keep the fans happy

There's not much to change when you're just going round and round in circles

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2620529
Share on other sites

parents have the 05 camry.

WORST handling car ever.. Apart from that, i love it!! much better on fuel than my line lol.. but two totally different cars anyways..

But good on toyota to enter.. They should start making the new supras already.

lol its actually more like 11+ different cars... They use different chassis at pretty much every track. HUGE money..

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2620534
Share on other sites

  • 1 month later...
There's not much to change when you're just going round and round in circles

All the money that Toyota will spend getting their Camry to go round and round an oval track at high speeds will shave valuable tenths off the ability of the road car to do laps of the shopping centre carpark.

And, as any carpark racer knows, a few tenths can make the difference between getting a parking spot and getting beaten by someone in a Commodore who has driven against the painted arrow signs to sneak in.

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2757251
Share on other sites

parents have the 05 camry.

WORST handling car ever.. Apart from that, i love it!! much better on fuel than my line lol.. but two totally different cars anyways..

But good on toyota to enter.. They should start making the new supras already.

Mate, I beg to differ on that point 100%.

The 2005 Camry is the Series 2 model of the 03/04/05 generation of Camry.

I own both a Nissan Stagea with the FULL suspension kit from SK and also a 2003 V6 Manual Camry Spotivo. To be honest, I am happy to take either of them up into the hills as they are both very well handling cars. I went on cruises with various cars and Id always lead as usual, where many people would laugh at me at the start when I said "follow the Camry", yet at the end id get questions like "how do you keep those corner speeds".

The one downside of the Camry is the lack of power in areas, specially uphill (Compared to my turbo Stag) and also it does have slight oversteer issues on corner entries, but that is fixable by proper driving.

And, FWD cars dont suck as much as everyone says they do, maybe those people just need to drive good FWD cars...

Anyway, good luck toyota.

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2757940
Share on other sites

  • 5 weeks later...
Mate, I beg to differ on that point 100%.

The 2005 Camry is the Series 2 model of the 03/04/05 generation of Camry.

I own both a Nissan Stagea with the FULL suspension kit from SK and also a 2003 V6 Manual Camry Spotivo. To be honest, I am happy to take either of them up into the hills as they are both very well handling cars. I went on cruises with various cars and Id always lead as usual, where many people would laugh at me at the start when I said "follow the Camry", yet at the end id get questions like "how do you keep those corner speeds".

The one downside of the Camry is the lack of power in areas, specially uphill (Compared to my turbo Stag) and also it does have slight oversteer issues on corner entries, but that is fixable by proper driving.

And, FWD cars dont suck as much as everyone says they do, maybe those people just need to drive good FWD cars...

Anyway, good luck toyota.

Agreed! If you don't have a Sportivo model, then fair enough. All the motoring mags agree that the Sportivo suspension should have been the ONLY suspension spec released in that series of Camry...

My old man has an '03 Sportivo, and if it wasn't for the fact that he chose a 4cyl auto, it would be a (much more) fun car to drive. It ain't perfect, but apart from the lack of power, I'd rather drive that than the Audi A4 1.8T that my oldies also own (which, unfortunately, is also an auto - TipTronic is NOT the same as a manual). The Audi is too stiff and can hop about in the arse end when you hit a bump mid-corner, throwing the car off-line (even in normal day-to-day driving).

Back on topic...

Toyota know exactly how to market themselves to the world. They make a reliable, non-offensive product which suits the majority of the market who are just after better-than-average transport, and then they market the hell out of it to catch the eyes of this target demographic group.

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2828999
Share on other sites

Mate, I beg to differ on that point 100%.

The 2005 Camry is the Series 2 model of the 03/04/05 generation of Camry.

I own both a Nissan Stagea with the FULL suspension kit from SK and also a 2003 V6 Manual Camry Spotivo. To be honest, I am happy to take either of them up into the hills as they are both very well handling cars. I went on cruises with various cars and Id always lead as usual, where many people would laugh at me at the start when I said "follow the Camry", yet at the end id get questions like "how do you keep those corner speeds".

The one downside of the Camry is the lack of power in areas, specially uphill (Compared to my turbo Stag) and also it does have slight oversteer issues on corner entries, but that is fixable by proper driving.

And, FWD cars dont suck as much as everyone says they do, maybe those people just need to drive good FWD cars...

Anyway, good luck toyota.

Take a DC2 Type R Integra for a spin, you'll convert to FWD >_<

Did anyone ready that Marcos Ambrose has 16 cars to drive this season in NASCAR? they get shipped all over the country and he has 2 or 4 favorite cars. Nice to have a choice :happy:

Link to comment
https://www.sau.com.au/forums/topic/140205-why-toyota-why/#findComment-2829895
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...