Jump to content
SAU Community

R31/r32 Brake Upgrade......help!

NismoR31Jet
 Share

Recommended Posts

NismoR31Jet Community Regular

NismoR31Jet

Posted
Posted

Heyyas.

On my R31 tha tI use for track days, I am currently running R32 GTR or R33 GTS-t sumitomo calipers (I cant remember what they are off) and 280mm DBA slotted disks with RaceBred custom pads (Racebred build GTP and targa porches and these are the targa compound). Rears are standard R31 brakes with drilled rotors and same pads as front.

This setup was fine with the RB30 making just under 200 rwkw but with the Rb26 making just under 270rwkw they are not cutting the mustard!

After 3 laps at sandown I get shocking brake shudder and the brakes are starting to fade badly

Now, I am looking at upgrading my brakes, but to what.

I had my mind set on Brembos from a 33 GTR but after looking around on here they lont look much larger than the sumitomos I am currently running. I am sure they are larger, but they are still a 4 pot and for the price, I am sure there is a better option.

I have noticed kits that use a dogbone bracket to mount the sumitomo caliper out further from the disk and run a larger disk (325mm I think?) This kit with alloy hats and disks costs around the same as a set of second hand front brembo calipers on their own!

But are the sumitomo calipers junk or are they ok?

I will upgrade the rears but with the matching caliper to what I use (or will be using) on the front.

Any info or opinions would be great.

Link to comment
https://www.sau.com.au/forums/topic/140227-r31r32-brake-upgradehelp/
Share on other sites
Roy Grand Master

Roy

Posted
Posted

If you are running 280mm rotors then they are R32 GTSt or Z32 calipers.

Depends on your budget, but at 3k i would be very tempted to use the AP 4 pot caliper with DBS 5000 324mm rotors that UAS sells. Race Brakes in Melbourne does a similar kit with the same caliper but their own 330mm rotor for another $400 odd.

OUt of interest, what times, tyres etc are you running at Sandown?

NismoR31Jet Community Regular

NismoR31Jet

Posted
  • Author
Posted

I only managed 3 laps at sandown (kept loosing oil pressure above 6500 rpm) and the best I got was 1:30.

That was my first time out at sandown that was not in the rain!

At calder with the RB30 I managed a 1:10 with this brake setup.

I am not sure on budget yet, I guess I want to find out what I need and do my research and see what is out there.

Then I guess budget will be worked out then.

Roy Grand Master

Roy

Posted
Posted
I only managed 3 laps at sandown (kept loosing oil pressure above 6500 rpm) and the best I got was 1:30.

That was my first time out at sandown that was not in the rain!

At calder with the RB30 I managed a 1:10 with this brake setup.

I am not sure on budget yet, I guess I want to find out what I need and do my research and see what is out there.

Then I guess budget will be worked out then.

What tyres? And what weight is the car?

The 324mm brackets are a decent upgrade for the calipers you have...but they are a band aid and whilst a good budget updgrade, if you have the money to spend then there are better options...starting with the CSC 343mm kit which is about $2800 including pads.

I would also grab some Z32/R32 rear calipers and rotors as well.

NismoR31Jet Community Regular

NismoR31Jet

Posted
  • Author
Posted

this was using my regular street tyres.

Front are goodyear revspec 215/40 18 and rear bridgestone potenzas 235/40 18.

I was runnng some 15"s with semi comps, but I was getting more wheelspin with them as they are a bit small (only 205/60 r15).

As for car weight, a stock R31 in my model is around 1300 kg, mine has the rb26 now but has had the AC removed and the power steer removed so I would estimate around the 1300 should still be right?

I guess the first thing I should have done is run ducting to the brakes! I am sure the extra airflow would

have helped!

The only other drama is getting them to fit on an R31! I have had the face of the sumitomo calipers shaved off to give more clearance between the caliper and rim.

Duncan Grand Master

Duncan

Posted
Posted
I had my mind set on Brembos from a 33 GTR but after looking around on here they lont look much larger than the sumitomos I am currently running. I am sure they are larger, but they are still a 4 pot and for the price, I am sure there is a better option.

I totally agree....the gtr brembos are a popular upgrade but very bad value I think. Have a look at recent threads in here there are some good options including the just jap 8 spots for 2200.

NismoR31Jet Community Regular

NismoR31Jet

Posted
  • Author
Posted

I think the biggest drama would have to be the disks.

They are either too small in diamater, or the DBA gear is not great quality which is contributing to the disks warping fairly quickly. Or even a mix of both.

which is why I am considering moving my existing caliper out and using a larger diamater disk. Yes, I know that the actual pad area is no greater, but there is more heat dissipation available with the larger disk?

slip Mentor

slip

Posted
Posted

when i put the big brakes on my 31, the std DBA slotted rotors lasted a couple of months, and then upgraded to 4000series. And that was for mountain work, so it's not just you. At that diameter, youd need at least 4000series DBA, but i really think you need bigger diameter 4000series minimum. I'd go with that idea, dogbone it, same calliper, bigger and better disk, see what happens.

have you figured out the rear handbrake setup with 32 callipers on there? let me know if you need help.

NismoR31Jet Community Regular

NismoR31Jet

Posted
  • Author
Posted

There are no backing plates on the front brakes from factory, but there are on the rears, I had removed them but didn't make much difference, but I really think ducting to the front brakes will make a huge difference.

As for rotors, I have noticed a few people on here having issues with the DBA rotors cracking, but what other disk manufacturers are there that do replacement slotted rotors? Are the RDA rotors any better?

As for the handbrake with R32 rear brakes.....How did you do it?

slip Mentor

slip

Posted
Posted

commodore drum handbrake custom'ed on, with of course everything else custom. but they are CRAP. i really think there must be a better handbrake drum setup that could be easily adapted off another borg warner car. hsv rotors, which were not cheap, but slotted/vented, didnt want solid.

NismoR31Jet Community Regular

NismoR31Jet

Posted
  • Author
Posted
commodore drum handbrake custom'ed on, with of course everything else custom. but they are CRAP. i really think there must be a better handbrake drum setup that could be easily adapted off another borg warner car. hsv rotors, which were not cheap, but slotted/vented, didnt want solid.

I am thinking using the backing plate and hand brake setup from an s13 or r32/33. That way I know it will fit the inside of the disk correctly.

I was thinking of doing the Commodore setup, and I have even seen XD-XE V8 fairlane rear brakes adapted, they use a 280-290mm (I think) vented rotor with a large caliper with the hand brake built in to the caliper much like an R31.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      How's your first born doing? 😛 As for now what? Time to forget about it for 12 to 18 months while your go down a totally unrelated rabbit hole... 😛
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Fuse taps are perfectly fine to use, especially when you're adding stuff for your own car, and so long as you're being smart about it. IE, don't throw a 30amp circuit, onto a circuit that is only a small circuit. It's best to add a small circuit, to one that is already quite large. Oh, and make sure you're not going to blow the fuses that are further upstream too! I dislike their use in other applications, such as alarms, telematics/tracking devices etc, as it's far too easy for someone to unplug them and render a system useless. Those sorts of devices I go for wiring in quite secretively.
    • DraftySquash
      R34 GTT Central Locking Pains

      By DraftySquash · Posted

      Fob is all cleaned up and it’s working well!! The amount of Vegemite looking sh*t that was in there is mind blowing 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Given it is temporary, I bought a  cheapy gauge mount (which has become enflattened) which I will screw into the existing phone mount Also a first for me; given this is a temporary install I could not think of any reason not to use one of those "add a fuse" thingies to source the battery and IGN power. I had always figured they were pretty dodgy but having a good look at them I think they are a valid option for sourcing power from an existing source without cutting 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Finally for now, a bit more work on the transmission temp gauge. I was wondering how Raceworks do a gauge for $100 that autometer want $500 for. No idea about the accuracy of course, but they have cut a few corners that made things hard.  First one I mentioned above, the sender is physically difficult to fit and doesn't work with their own adapters (the extra fittings I used to get the sender into a hose cost more than the whole gauge, lucky I had stuff in the shed) Second, the temp sender wires are way too short. They are shown as 2.7m on the box and I know my routing was long from navigator headlight to driver's firewall back to centre console, but I had to lengthen them by about 2m total - 2 joins in each wire. Also, same with the supplied power loom, they needed about an extra 1m to get the fuse box where I sourced power. Another join in each wire since one end wasn't supplied terminated. I know they could argue that the wires might be long enough depending on situation, but when you consider parts and particularly labour, it would be a very expensive cheap gauge if you can't do the work yourself. And, only a small issue....but it would have been nice if they remembered to tap a tread onto *both* spacers they supplied for the bracket....I haven't had to use the M4 tap often!
×
×
  • Create New...