Jump to content
SAU Community

Recommended Posts

Holden Calais Turbo

Automatic RB30ET

1986 VL Calais Turbo ( Full Turbo Conversion ) 194,000ks

YLWCAL Plates ( Recently Bought for $395 )

600x300x76 Front Mount Intercooler

with 2.5 Inch Piping (AFM in piping)

2 1/2 Exhuast with 3'Tip

New HDI Dual Stage Boost Controller ( 7 Low/ High 9 )

Smoked Face Boost Gauge

Upgraded 120a Alternator

T03 Turbo ( No Shaft Play )

Cleaned VLT Injectors

3TA ECU

Transmission Cooler

Oil Catch Can

Pod Filter or Airbox With CAI (K&N)

4 Wheel Disc Brakes

17' BSA Shadow Chrome 90-95% tyres left!

New battery

Automatic Transmission with 3 Months Warrenty

Brand New 8mm Leads ($80)

Sports Pedals

Autotechnia Woodgrain Steering Wheel

Its had new oil, Oil Filter, Plugs, Coolant, 02 Sensor, Re-co'd AFM in the last 1000km

Always ran on BP Ultimate

Some details on the Sound System

7' Indash TFT With a seperate dvd player

4' Inch Clarion speakers up front

MTX 6x9s in the rear

Custom Boot Install ( Was bought from a BT1)

2X12inch VNet Subs

2 2 channel Clarion Amps (One is stuffed was left there for looks)

1 4 Channel Clarion Amp

Farad Capacitor

Circit breaker

As for the body its very straight body kit wise its a Group A rear and front spoiler with LE Skirts

in Joa Yellow with calais options as factory with dark tinted windows

I'm sure theres more just can't thing of it..

Problems..

A/C Was removed for intercooler( Tinted windows reduces a lot of heat )

Cruise control was removed for Catch Can

Both units will be included with the sale just not hooked up.(Wiring Loom & Vaccum lines are all there)

Rear spoiler was hit has been touched up, proberly cost 100-200 to repair no fibreglass damage!

Sometimes gets lifter noise on cold start up lasts 3-4 secs (Common in vls)

Has noise coming from diff/tailshaft ,maybe center bering ( May Fix depends on price i get for it)

Never Thrashed it, Transmission shifts fine never slips, Wheels and tyres were bought a year ago and still have 90-95% all round (Recipts etc to prove)

Lost interest in VL's wanting something newer. May consider swaping plus cash for somethign newer eg. R33/R32

Currently not in Roadworthy condition with the catch Can and wheels being to big and a few minor issues but can organise something..

IMGA6956.jpg

IMGA5732.jpg

IMGA3549.jpg

SoundSystem.jpg

IMGA3544.jpg

DSC02585.jpg

DSC02582.jpg

DSC02587.jpg

You got nothing nice to say about it, keep it too yaself!!

Asking Price: 8k depending on RWC..

PM me or contact me on [email protected] for more details

Edited by michael2427
Link to comment
https://www.sau.com.au/forums/topic/140265-fs-vl-calais-turbo/
Share on other sites

  • 2 weeks later...

Thanks for the comments, i owned it since my L's and built her up so i treat it with respect!, the car is still for sale, if your interested send us a PM or Email me on [email protected] for any other info!

Few pics that have been taken today

cal.jpg

cal2.jpg

Edited by michael2427

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...