Jump to content
SAU Community

Problem Starting Car

Ricey

By Ricey,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Ricey Collaborator

Ricey

Posted
Posted

My R32 wont kick over. It started playing up a few days ago ever since my alarm screwed up. We had to jump start it etc. Last night it wouldn't start again, so we jump started it again and it started fine. Today it is doing the same thing but my brother insists its not a flat battery. We tried jump starting it again but it just wont kick over. Its not the fuel pump cause we tested that. I'm thinking some sort of ignition problem..? Does anyone have any ideas...? Need to get this sorted ASAP. Don't really want to tow it anywhere.

Link to comment
https://www.sau.com.au/forums/topic/140280-problem-starting-car/
Share on other sites
kristafa Proficient

kristafa

Posted
Posted

so your engine is cranking? i know a few things:

if there's not much charge in the battery you can have problems with starting/smooth idling (even though the motor turns over)

if you have problems with your alarm (with immobiliser) then depending on how your immobiliser is setup you wont get power to various places (fuel pump, ecu, ignition, etc...)

i'd be making sure i get ecu power by checking out the led on the unit (on when key is IGN position), making sure the fuel pump is flowing fuel to the fuel rail when the motor is turning over, get the immobiliser situation sussed out by whoever installed it...

blind_elk Grand Master

blind_elk

Posted
Posted

So, the starter motor turns the engine, but the engine doesn't want to fire? Have I got it right?

Nissans are VERY sensitive to voltages. A battery may start the car, but then the alternator expends so much of its output re-charging the battery that the ECU thinks there is a problem and the car runs like crap.

The other thing is that the ECU needs a minimum voltage (somewhere around 7V) to be "alive". If the starter motor drains so much voltage that the voltage available to the ECU is less than this critical value, then the engine might spin for ever, but the ECU isn't alive to fire everything off.

If you ever have troubles with starting and batteries, the usual fix is a new battery.

Ricey Collaborator

Ricey

Posted
  • Author
Posted
So, the starter motor turns the engine, but the engine doesn't want to fire? Have I got it right?

spot on.

I'm going home tonight to give jumpstarting it another go. It worked last night. I'll go buy another battery asap. It's got to be something to do with the battery. My alarm went off the other night and we had to just let it sound untill it drained the battery (I didn't have the key to turn it off). And since then i've had problems.

Thanks for the advice guys I'll keep u updated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      HK Premier with plans for slight mods, but keeping clean and simple

      By dbm7 路 Posted

      Wrt the engine, you're very much limited by 'production quality' as to how much extra power you can extract from them (I'm talking i6 red-motor) -- a lot here depends on how 'authentic' or 'period correct' you want the modifications to be... ...I'm too old... <grin>...the first true performance engine Holden made, was in the HD/HR models ~ this was the 'X2' performance pack...it came with twin downdraft strombergs on an otherwise unimproved intake manifold, with a two piece exhaust manifold (reckoned to be as good as extractors)... ....these engines were built upon the '179HP' cylinder block, which included extra webbing in the casting to make it stronger and less susceptible to block distortion... The next performance i6 came out with the HK Monaro (also found it's way into the LJ GTR Torana ... the car I wish I hadn't sold)...it had pretty much the same manifold setup, but was built against the '186S' block...this block retained all the extra webbing of the 179HP block, but added a forged steel crankshaft (instead of the stock cast crankshaft), because it was possible to snap the crank... ...apart from the inherent weaknesses in the stock (cast crank) blocks, the next limiting factor is the cylinder head porting & combustion chamber design, and the actual valve sizes. Back in the day, you could buy a 'yella terra' cylinder head (from stage 1 to stage 5 gradients), and this was the way to get serious power out of them -- with the extra breathing of these heads, you could fit a triple SU or DCOE Weber setup... ...obviously, these mods were a waste of time on a stock cylinder head/camshaft grind. My housemate rebuilt the i6 in his VH dunnydore about 6 months back -- this is a 186S block with the 12port 2850 blue motor head and intake/exhaust manifolds, with a dual throat Weber off an XF Falcon mounted on an adapter plate ; it's not a bad makeup...got more torque & fuel economy just light-footing it about on the first throat, but stand on it and it makes more giddy-up than the standard 2850 blue motor that it replaced. Personal note: I'd just fit an RB30 and be done it it 馃槂  
    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. 路 Posted

      Thanks for sharing. That's a great video! My buddy is doing the same thing on his build (S chassis struts and towers). He's building an S14 with billet RB30 shooting for 2000whp... a race car with a TH400 just like this video. For a road car I just couldn't go this route as the strut has to be almost vertical and the caster is not going to pivot correctly (let alone camber gain). You think the R32 frontend is bad, wait till you put a MacPherson strut on without modeling it all in Solidworks to check geometry. I'm not saying it's a bad way to do it but I'd be really curious to see how it affects the geometry.
    • PranK
      HK Premier with plans for slight mods, but keeping clean and simple

      By PranK 路 Posted

      Hey Christof and welcome!  Sounds like an awesome project! I'm not sure many of the regular users on here would know much about the HK but I could be wrong.  Looking forward to updates.
    • Predator1
      Intercooler Choice

      By Predator1 路 Posted

      As long as its NOT a HyperSHITtune, youll be fine.
    • Christof
      HK Premier with plans for slight mods, but keeping clean and simple

      By Christof 路 Posted

      First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
脳
脳
  • Create New...