Jump to content
SAU Community

Recommended Posts

  • Replies 120
  • Created
  • Last Reply

Top Posters In This Topic

well i dunno.. i think the best thing is to say, unless you can make it for the whole day, and its too inconvenient...then organise to do it in your own time. It might cost you $300 but money is convenience

I think the whole idea is just to get everybody together when its convenient for the whole day and make a bit of a social thing out of it as well. If you are prepared to wait around the whole day, then you'll get the group discount. If not, do it on your own time and pay slightly more.

well Al coz your working u can jump in 2nd but the rest of yas i really dont wanna set exact times its just easier running it first in first dressed, i dont care when i go ill be there all day, i never put stress on anyone doing anything to my car coz i want the job done properly, even if they run out of time ill come back next day if the job will be done better, i think u guys would have the same mentality as me, we all own skylines :) but yes im sticking with R31Nismoids idea offirst in except for the guy who has to be first (as arranged previously and Al who's on call) otherwise its just random :D seeyas saturday boys

DJ thanks for the offer, but we shall stick to what is fair for all (apart from the guy who asked to be first), so if ppl arrive b4 i will be more than happy to get the car done after theirs.

I too want a TOP CLASS job done to my car and do not wish to rush anyone, hope that 11 cars in 8hrs isn't going to result in sub standard work, but the finish should be fully garanteed against bubbling, peeling and workmanship.

I am going to carefully remove my rear seats and parcel shelf b4 i get there, as i don't want them to "accedently" damage or scratch the car. Does any other trim needs to be removed? This will also save them alot of time, thus taking a little more care on applying the tint.

I found out last night that the winter season of tennis starts this saturday :< i'm going to ask a mate at school tomorrow to fill in for me but if he is busy then the earliest i'll be able to get there is about 1:00. Would this be ok?

also, will i need to remove the parcel shelf (have stock speaker covers)?

cheers,

Greg

DJ,

Can you do us another small favour and ask the guys at Tint-a-car what they remove out of the car to tint the windows.

ie:Parcel shelf, rear seats, door trims, trim around rear quarter windows, etc.

As i would like (and i am sure a couple other people may feel the same) to take these items out slowly and carefully myself.

Thanks BUDDY for your patience

Alan

yup i will, i know for sure they need to get their hands and a sqeegy (however u spell it) on every window they do to each edge so for most of us that means parcel shelf has gotta go out, im taking that at least out before the day but ill find out what else, i'd assume they would need to remove everything else unless the tint on the side windows extends below the sealinto thew door (but i dont see why if ya dont see it why would they waste their time taking the doors apart) nevertheless i will enquire

my soarer is being tinted right now - he needed to take of door trims and window surrounds so he could get right down the glass. Also will need to take off rear parcel shelf because the rear brake light is in the way. I think on the 33, you shouldnt have a problem with parcel shelf, but would bet you will need to take of door skins.

OK decided to remove all trim around glass. This is what i done:

-Rear seats

-Parcel shelf

-Rear speakers

-Rear arm rest panels

-Rear side/roof panels (the ones that go round the triangular windows.

To be done soon:

-Front door trims

-Front speakers

All these thing were relatively easy to remove and only took me 2hrs with alot of care.

Its hard to get the rear seat without scratching your rear side trims as u get the bottom part of the seat out.. Mine have a few skuff marks now as i've done it a few times. For those doing it I recommend you place a blanket or rag over that area to prevent this.. just take care.

Personally I am taking out rear seat.. parcel shelf and i gotta rip my old tint off the quarters (i think they might have been done factory). Door trims are 5 min job if u know how to do it.

I am sure they can do it so I wouldn't worry about that too much

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...