Jump to content
SAU Community

Recommended Posts

FARK!!!

anyone used the caltex/woolies petrol station on karawatha drive?

went down there this morning because they are 8c cheaper than the maroochy one @ 1.24 for unleaded.

went past, traffic was spilling out onto the road-as usual!!. all the old precious ditties from the damn retirement home are filling up. the thing is there is only 1 bowser that offers 98oct, and all the common cars are using it instead of going to the furthest bowsers which offer 95ron and 91ron (which only have maybe 1-2ppl in the line), and not allowing room for others to get to the 98 ron fuel!!!!!!!

so yea, i thought ok cool im just above empty, i will drive around for 10min, and come back when it is calmer. came back and it WAS WORSE. traffic is lined back to the beginning of the units. so i thought f**k this im just going to line up. 5sec later i saw a police car complete an ILLEGAL U-TURN (without lights), then proceeded to flashed me and other people in the line telling us to move on...."its a traffic hazard."

so i f**ked off, and now have to schedule it into my day later between classes and work, because of POOR PLANNING, and top bloke drivers going to the nearest pump (which offers 98) showing no regard for other drivers.

WHO EVER DESIGNED THAT PLACE IS A FARKING IDIOT.

lol so that is me venting.....feeling better now :D

Edited by r33cruiser

went back this arvo...hoping to fill up before a lecture. and its the same SHIT.

packed full.

so thought f**k this i will go to chancellor park, dont mind paying a bit extra (1.30 unleaded).

HOW THE f**k CAN THE COUNCIL APPROVE SUCH A 'LUDECRIS' design with such a HUGE design flaw!

CD please explain ffs.

they had to realise it is the only petrol station servicing that area. and with so many people.......its way tooo small

Edited by r33cruiser
went back this arvo...hoping to fill up before a lecture. and its the same SHIT.

packed full.

so thought f**k this i will go to chancellor park, dont mind paying a bit extra (1.30 unleaded).

HOW THE f**k CAN THE COUNCIL APPROVE SUCH A 'LUDECRIS' design with such a HUGE design flaw!

CD please explain ffs.

they had to realise it is the only petrol station servicing that area. and with so many people.......its way tooo small

Brad,

Pm Sent!!!

Happy to talk with you further.

Chris

Edited by SunnyCoast

ummm you havent been in a car park in noosa lately have you? or the petrol station at the noosa civic. honestly i would wait till you have been there on a wednsday afternoon. :) all of noosas car parks are shockingly designed.

Edited by 000DNK

I get my car back tommorrow with the new paint job :) only a repsray but its gonna look sick!.

hwo can i convience my mates not to go crusing tommorrow night in a car that is not legally registered and no mod plate and the other one just is not mod plated. thursday night pre anzac day...they insane?

ummm you havent been in a car park in noosa lately have you? or the petrol station at the noosa civic. honestly i would wait till you have been there on a wednsday afternoon. all of noosas car parks are shockingly designed.

no

i live here :):O

Edited by r33cruiser
lol well noosa has to many round abouts and to smaller car parks

Noosa has traded traffic lights for roundabouts. A simple planning idea to provide "constant flow of traffic", i do however agree a mixture is more beneficial to aleviate high traffic bottlenecks in prominant areas.

Still, its never to late to fix the problem. It will just cost alot of money to do so. Perhaps the focus needs to be taken off road infrastructure and the emphasis shifted towards better public transport based on a cbd transport scheme.

Chris

Edited by SunnyCoast
anyone know wether the clubs will close at 12 tonight due to anzac day?

Not sure but you can count on goin to the pub a lot earlier tomorrow morning for a liquid breakfast :rofl:

Heyyy guys, I just baught a skyline - I live between Kawana Waters and Caloundra.

Just wanted to say hi to everyone and maybe meet a few new people :P

Hi Mate, is that a piccy of your new ride? whats the spec sheet look like :D

that looks alot like the lushes ignition dvd r33 that was on there a while ago.

saw a black 4door r33 coming out of the uni this arvo. had white wheels, looked to be deep dishies.

anyone here?

Hi Mate, is that a piccy of your new ride? whats the spec sheet look like :)

Yeh thats my car - It's nothing too spectacular at the moment just a standard rb25det under the hood other than that its just got a bodykit wheels interior & dvd screens.

I am looking to do some modifications though, I have a front mount and dual stage boost boost controller on the way shortly although my knowledge on mods after there is pretty limited lol. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...