Jump to content
SAU Community

Recommended Posts

hey guys im looking to buy some coilovers for my r32 gtr. currently uni KYB shocks & springs jus sits a little lower then stock and im gettign way to much body roll & the rear end feels like its gna flick out any moment. so im looking into coilovers but i know nothing about spring rates etc :)

i know for ride height the optimum is 34cm front and 32cm rear from the wheel base or is it the other way? lol.. but for spring rates.. it is my daily driver and i dont want a harsh ride but i also want to feel like im on rails when i need it :)

what spring rates should i be looking at?.. saw a set of coilovers (D2 coilovers - track spec) with Front 9k, Rear 7k but that means absolutely nothing to me haha so could the suspension guru's shed some light :)

would this work well for my needs?. i jus assume they will be abit stiff cause the obvious 'track spec' name.

i was also looking into SK's bilstein shocks/springs but at this time i cant afford it lol. any other brands/makes you guys would recommend?

thanks!

Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/
Share on other sites

hey guys im looking to buy some coilovers for my r32 gtr. currently uni KYB shocks & springs jus sits a little lower then stock
The word is THAN, FFS - lower THAN stock.
and im gettign way to much body roll
Then you need sway bars
& the rear end feels like its gna flick out any moment. so im looking into coilovers but i know nothing about spring rates etc :)

i know for ride height the optimum is 34cm front and 32cm rear from the wheel base or is it the other way? lol.. but for spring rates.. it is my daily driver and i dont want a harsh ride but i also want to feel like im on rails when i need it :)

what spring rates should i be looking at?.. saw a set of coilovers (D2 coilovers - track spec) with Front 9k, Rear 7k but that means absolutely nothing to me haha so could the suspension guru's shed some light :)

way too heavy
would this work well for my needs?. i jus assume they will be abit stiff cause the obvious 'track spec' name.

i was also looking into SK's bilstein shocks/springs but at this time i cant afford it lol. any other brands/makes you guys would recommend?

If you can't afford these, you can't afford decent suspension either. You won't find much better for much less.
Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2622491
Share on other sites

haah thanks for fixing my grammar too while your there :)

yeah i wanted to get some suspension nowish. but i guess i will jus save up to do it in one hit then. i was also looking into sway bars earlier. ill most likely jus get SK's setup then.

thanks for ur help!

Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2622495
Share on other sites

get swaybars first. and then get the shocks later, im assuming you can use your springs with the bilsteins. measure them and then get SK to check the rates and he can tell you if they're suitable.

the swaybars will control the roll well

optimal ride heights are 350mm and 340mm (front and rear). 320mm rear is too low and handles like crap.

D2 coilovers are crap, dont waste your time/money

the groupbuy bilsteins are great. definitely get them

Edited by salad
Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2622658
Share on other sites

with STANDARD SWAYBARS front 7-10k rear 5-7k

with aftermarket bars take 30% out.

so if ya get whiteline ones id setle on front 6k rear 5k ish. but you have to remember the light er the spring you get the better the shock (damper) has to be.

i used to run k-sport shit. f 9k rear 7k was ok but very choppy. with no corner speed at all.

if your on a budget id pik the ones (coilovers)that come with the lightest springs.

Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2624315
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...