Jump to content
SAU Community

Recommended Posts

hey guys im looking to buy some coilovers for my r32 gtr. currently uni KYB shocks & springs jus sits a little lower then stock and im gettign way to much body roll & the rear end feels like its gna flick out any moment. so im looking into coilovers but i know nothing about spring rates etc :)

i know for ride height the optimum is 34cm front and 32cm rear from the wheel base or is it the other way? lol.. but for spring rates.. it is my daily driver and i dont want a harsh ride but i also want to feel like im on rails when i need it :)

what spring rates should i be looking at?.. saw a set of coilovers (D2 coilovers - track spec) with Front 9k, Rear 7k but that means absolutely nothing to me haha so could the suspension guru's shed some light :)

would this work well for my needs?. i jus assume they will be abit stiff cause the obvious 'track spec' name.

i was also looking into SK's bilstein shocks/springs but at this time i cant afford it lol. any other brands/makes you guys would recommend?

thanks!

Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/
Share on other sites

hey guys im looking to buy some coilovers for my r32 gtr. currently uni KYB shocks & springs jus sits a little lower then stock
The word is THAN, FFS - lower THAN stock.
and im gettign way to much body roll
Then you need sway bars
& the rear end feels like its gna flick out any moment. so im looking into coilovers but i know nothing about spring rates etc :)

i know for ride height the optimum is 34cm front and 32cm rear from the wheel base or is it the other way? lol.. but for spring rates.. it is my daily driver and i dont want a harsh ride but i also want to feel like im on rails when i need it :)

what spring rates should i be looking at?.. saw a set of coilovers (D2 coilovers - track spec) with Front 9k, Rear 7k but that means absolutely nothing to me haha so could the suspension guru's shed some light :)

way too heavy
would this work well for my needs?. i jus assume they will be abit stiff cause the obvious 'track spec' name.

i was also looking into SK's bilstein shocks/springs but at this time i cant afford it lol. any other brands/makes you guys would recommend?

If you can't afford these, you can't afford decent suspension either. You won't find much better for much less.
Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2622491
Share on other sites

haah thanks for fixing my grammar too while your there :)

yeah i wanted to get some suspension nowish. but i guess i will jus save up to do it in one hit then. i was also looking into sway bars earlier. ill most likely jus get SK's setup then.

thanks for ur help!

Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2622495
Share on other sites

get swaybars first. and then get the shocks later, im assuming you can use your springs with the bilsteins. measure them and then get SK to check the rates and he can tell you if they're suitable.

the swaybars will control the roll well

optimal ride heights are 350mm and 340mm (front and rear). 320mm rear is too low and handles like crap.

D2 coilovers are crap, dont waste your time/money

the groupbuy bilsteins are great. definitely get them

Edited by salad
Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2622658
Share on other sites

with STANDARD SWAYBARS front 7-10k rear 5-7k

with aftermarket bars take 30% out.

so if ya get whiteline ones id setle on front 6k rear 5k ish. but you have to remember the light er the spring you get the better the shock (damper) has to be.

i used to run k-sport shit. f 9k rear 7k was ok but very choppy. with no corner speed at all.

if your on a budget id pik the ones (coilovers)that come with the lightest springs.

Link to comment
https://www.sau.com.au/forums/topic/140769-spring-rates/#findComment-2624315
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
    • Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
    • While it is a very nice idea to put card style AFMs into the charge pipe (post intercooler, obviously), the position of the AFM and the recirc valve relative to each other starts to become something that you really have to consider. The situation: The stock AFM is located upstream the turbo, and the recirc valve return is located between the AFM and the turbo inlet, aimed at the turbo inlet, so that it flows away from and not through the AFM. Thus, once metered air is not metered again, neither flowing forwards, or backwards, when vented out of the charge pipe. When you put the AFM between the turbo outlet and the TB, there is a volume of pressurised charge pipe upstream of the AFM and there is a volume of pressurised pipe downstream of the AFM. When the recirc valve opens and vents the charge pipe, air is going to flow from both ends of the charge pipe towards the recirc valve. If the recirc valve is in the stock location, then the section between it and the TB doesn't really matter here - you're not going to try to put the AFM in that piece of pipe. But the AFM will likely be somewhere between the intercooler and the recirc valve, So the entire charge pipe volume from that position (upstream of the AFM, back through the intercooler, to the turbo outlet) is going to flow through the AFM, get registered as combustion air, cause the ECU to fuel for it, but get dumped out of the recirc valve and you will end up with a typical BOV related rich spike. So ideally you want to put the AFM as close to the TB as possible (so, just upstream of the crossover pipe, assuming that the stock crossover is still in use, or, just before the TB if an FFP is being used) and locate the recirc valve at the turbo outlet. Recirc valve at the turbo outlet is the new normal for things like EFRs anyway. In the even of a recirc valve opening dumping all the air in the charge pipe, pretty much all of it is going to go backwards, from the TB to the recirc valve near the turbo outlet. But only a small portion of it (that between the TB and the AFM) will pass through the AFM, and it will pass through going backwards. The card style AFMs are somewhat more immune to reading flow that passes through them in reverse than older AFMs are, so you should absolutely minimise the rich pulse behaviour associated with the unavoidable outcome of having both a recirc valve and an AFM in the charge pipe.
    • Yep, in my case as soon as I started hearing weird noises I backed off the tension until it sounded normal again. Delicate balance between enough tension to avoid that cold start slip and too much damaging things.
×
×
  • Create New...