Jump to content
SAU Community

Recommended Posts

:D

HI. ive got an R33 and for the last 8 days ive been having probs with excelleration. When i take off the car feels like it is pulling back. It is really hard to get ay boost and when i do it comes in dangerous short bursts. I thought it my be fuel tampering (scabby servos) so i let it run dry and went to anoher shell but its still happening. I'll be drving and will try and put my foot down and get no power then all of a sudden, i get, as i said, a shor power intake and it is quite dangerous cause it will happen when im right behind another vechile.

So if anyone out there has any suggestions i would more than appreciate your help as im so worried about my princess....

Thanks in advance

Gem

Edited by princess01
:sick:

HI. ive got an R33 and for the last 8 days ive been having probs with excelleration. When i take off the car feels like it is pulling back. It is really hard to get ay boost and when i do it comes in dangerous short bursts. I thought it my be fuel tampering (scabby servos) so i let it run dry and went to anoher shell but its still happening. I'll be drving and will try and put my foot down and get no power then all of a sudden, i get, as i said, a shor power intake and it is quite dangerous cause it will happen when im right behind another vechile.

So if anyone out there has any suggestions i would more than appreciate your help as im so worried about my princess....

Thanks in advance

Gem

I had similar problems with my last car (silvia turbo). Cleaning the air flow meter helped (take it out, run some metho over the element that sits in the middle of the afm (do NOT touch any wires with your fingers), let it dry fully then put it back in the car). Not sure what the problem was exactly. It seemed to do it more in hot weather or after the car had heated up a bit.

The reason cleaning my afm helped was because I was using an oiled air filter (k&n) and they tend get oil all over the element in the afm. I changed back to a dry air filter and had much better results. Cant say if the afm was the problem. I suspect the problem may have been elsewhere and just made worse by the afm reading incorrectly.

Other suggestions might be to check the fuel pump?? dunno.

Does it seem to accelerate ok up to when you'd hit boost? Does it stutter or just really bog down and you get nothing? In my case the revs would build up slowly and it would seem to pick up a little but it was terrible. And only after 15-20 minutes or so of driving. Often I could turn the car off then back on and it would be fine for a couple of minutes.

Hi, It might help if you list any mods (if any) on the car that you are ware of.

One of my mate's personally imported a series 6 RX-7 & it ran like crap because it was tuned in Japan to run on their premium fuel (108ron?). A simple re-tune on the dyno fixed it right up & it runs beautifully now.

has the car been previously owned in australia or are you the first owner?

Good luck with fixing your car & hopefully someone on here has an answer for you.

Hi, It might help if you list any mods (if any) on the car that you are ware of.

One of my mate's personally imported a series 6 RX-7 & it ran like crap because it was tuned in Japan to run on their premium fuel (108ron?). A simple re-tune on the dyno fixed it right up & it runs beautifully now.

has the car been previously owned in australia or are you the first owner?

Good luck with fixing your car & hopefully someone on here has an answer for you.

Hi,

There are no mods at alll on the car. It was owned in aus before me. Thanks for the advice. Ill give it a go

So... when you give it half throttle, it stutters? Or it drives normally but with no boost? When the boost comes on, it shouldn't launch you TOO hard on a stocker. What does the boost guage read when all this happens?

How far are you putting the boot in?

If it IS just the boost, and not a fuel or coilpack or whatever problem, then maybe you have a sticky wastegate actuator? You'd have to be gunning it and not just normal traffic driving to generate that much boost that you feel it though.

she did say it happens when shes taking off so its not the common misfiring problem.

it could be your:

CAS

AFM

spark plugs

coil packs.

do the spark plugs if you havent already. take your AFM out and spray with carby cleaner. do my coil pack fix, and try swap your CAS with someone else with an r33.

if you can get your hands on someone else's CAS, then do that first.

if you were in syd i'd be able to give you a hand.

Sounds to me like misfire

Does it happen around 4000/5000rpm onwards?

hi ta for your suggesstions. i took it apart and it is the coils. one cover is broken. YEAH!!!! not the thousands of crap that i thought it may be:)

ta gem

Check sparks, check coilpacks for hairline cracks, clean afm?

Does "sound" like the common missfire problem that nearly every line owner has.

hi ta for your suggesstions. i took it apart and it is the coils. one cover is broken. YEAH!!!! not the thousands of crap that i thought it may be:)

ta gem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...