Injectors - How To Remove/replace/upgrade

[rad100]

yeh i have done mine... awsome right up!

i forgot the bottom o-rings hydro locked a cyl. hahaa..

but when that was doen was awsome... now running 250.1rwkw in my 32 rb25

cheers again!

[bloodsword27]

so how do i go about fitting sard 550's to rb25?...having issues.. anyone if there's a write-up?

[HoWiE_Au]

Hey there guys, Thanks Alan i found this really important. But i thought i would make people aware of this, Be VERY CAREFULL when trying to remove the fuel rail and injectors out. And look at the end of the injector and make sure all off the 4 prongs or claws on the orange pintle cap are attached. Because i am currently sourcing the 6 pintle caps and there not easy to chase down because they are so wanted

Hope this helps Cheers Rob

[GTR_Legend]

Great DYI mate

Installed my Tomei 555cc today which replaced the std R33 GTST injectors.

I didnt remove the AAC, didnt get in the way at all for me. nor did the FMIC piping.

For cracking the injector cap screws i used multi grips.

To get the injector out of the rail i used a flat head screw driver and slipped it under the injector plug then twisted the driver to lever it out.

when i changed the power fc injector config, i used the following. Old Injector CC / New injector CC x 120 = 82

my power fc was configured at 120% for each injector...not sure why it was set like this but the above achieved a nice idle. i did actually test 66% based on the x100 calculation also...and idle went to hell...

[z0mbieJesus]

cheers thanks for the write up

[Sean'O]

Excellent write up bud! It was a really big help this weekend ,

Cheers,

Sean

[kb-r33]

Nice job, i'll be needing to take out my injectors soon.

[Smity42]

Old thread I know but something to point out:

For step 6) - Series one motors have FIVE bolts holding them in, not 3 like series 2s. I found four, missed one, and bent the rail slightly when I tried to pull it out

[Crans]

Any tips for getting injector plugs off if ya got big hands?

[LANDSCRIBBLE]

Will be replacing mine with a set of highflowed stockers in the near future. would you be able to drive the thing at all without tweaking the ecu?(vipec v44) cheers.

[ARTZ]

no...it will probably start up and idle ok but soon as you put it under load it pretty much floods it..then plugs will foul then it all falls apart..i tried it once, got around the block but barely made it home..lol

but if you have access to your ecu just find out how to change settings..

[LANDSCRIBBLE]

right, ok thanks for the heads up. ill see if i can fiddle with the settings myself, just so im able to limp it to the dyno the day after or something.

[Nathan.J]

really good writeup. i have a powerfc waiting to be installed in my series 2 gtst but i wanted to upgrade injectors first two quick questions..

1; will injectors give me much more power once installed and tuned with the power fc

2;where is the best place to get hold of some injectors and what size is good when chasing 300 to 350 hp?

cheers

[Mike32Skyline]

Hey guys, know this is a pretty old post, but need to know if there are any major differences when doing this for an rb20det ?
any steps added? important things to note?
anything will help, cheers

[Lisag03]

Would you be able to tell me what the connection in the yellow circle is please??

[SKY5HW]

Nice write up and presentation, my question is will we need to dyno the car once everything is fitted back?

[Ben C34]

14 minutes ago, SKY5HW said:

Nice write up and presentation, my question is will we need to dyno the car once everything is fitted back?

If you change to different injectors  it needs to be tuned.

[SKY5HW]

ok thanks