Jump to content
SAU Community

10mm Bolt On Spacers

Richo
 Share

Recommended Posts

Smoky Grand Master

Smoky

Posted
Posted
So what other alternatives do I have? Just the normal 10mm spacers with longer bolts? where do I get those then?

Cheers

Hey Richo, you cant get 10mm bolt on spacers, the smallest ive seen is 15mm. You will need longer studs if your going to run 10mm ring spacers and you can get a set of 20 Nismo 60mm studs for about $110 from Greenline.. Good luck with it :laugh:

Beer Baron Grand Master

Beer Baron

Posted
Posted

hub centric (or bolt-on hub centric) spacers are good (providing they are made from the right material). the normal round rings are not so good, but having said that we used 4 of them (10mm ones) on the race car and never had a problem with it, but I have heard of people cracking them, and also loosing studs etc.

Richo Mentor

Richo

Posted
  • Author
Posted

I've tried just jap but they dont have anything in stock,

I have seen the normal ones on ebay but not hub centric, which is what Im after, I dont want to have any problems,

I dont mind paying extra to get the good quality ones, the question is where? :yes:

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted (edited)

I actually got some made up so I knew they were 100% exactly right for my hubs, studs and wheels. Cost about $80 each. Are obviously hub centrifical. And they are a SNUG fit as in Im going to have to think of a clever way to get them off. I've also had longer studs put in so there is still heaps of meat there. I cant say I notice the difference on the road, but when you put the wheel on you do... Hard to explain but I do feel safer.

I got them from wheel revoultions in slacks creek - brisbane. So just pull up your white pages and put in 'wheels' and 'slacks creek' then scroll thru until you find them.

[edit] forgot to mention they are just slip on ones. The smallest they made in bolt ons is 15mm

Edited by dangerous_daveo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • joshuaho96
      R32 GTR - Where to begin

      By joshuaho96 · Posted

      I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • Murray_Calavera
      R32 GTR - Where to begin

      By Murray_Calavera · Posted

      It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • joshuaho96
      R32 GTR - Where to begin

      By joshuaho96 · Posted

      But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • Kinkstaah
      R32 GTR - Where to begin

      By Kinkstaah · Posted

      GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...