Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

are u sure the v power is the new "optimax extreme" ?

i always thought the v power stuff was red at the bowser and is the replacement for normal optimax and that optimax extreme was still called that and avaiable

V-power racing is the new extreme

V-power is the new optimax

Personally I wouldn't be running it in my highly tuned import without a proper tune for it or had it checked on the dyno, but hey, to each their own :P

Ziad - what do you get to a tank?

I'm sitting just below 1/2 with about 280km on the trip meter.

Will run it in the car at Wakefield next week too - see how it goes.

james, i dont know, as the car is at panel beaters hence the half tank. the tank\guage is not even, it will generally go slowly but after it reaches half it drops down quickly. on normal optimax i was getting about 13l\100k on general driving with a few squirts. u must be really babying it or a lot of freeway. i got about 8-9l\100km on my trip from sydney.

pretty sure its normal for petrol gauges to fall slowly at first, then quicker later on into the tank...

something about the way the sender works I believe :)

mine works the opposite way :)

people should just get the brochure on the new v-power fuel, it says that there is a new friction modifier added and thats it....IMO still a marketing exercise :)

The V-Power branding has been about for ages O/S...i doubt there is much new about it although they reckon it is...as it happens I had the 100RON in today when it was tuned...seems to go ok..my clutch doesnt though.

Just telll the service station guy you need an MSDS so that you can carry a jerry can in a work vehicle. Clever trick for wehn ppl dont want to tell you whats in their product :laugh:

as if the poor (insert indian/pakistani) console operator knows what a MSDS would be ;-), esp in independent servo

mine works the opposite way :O

people should just get the brochure on the new v-power fuel, it says that there is a new friction modifier added and thats it....IMO still a marketing exercise :)

I'll see if I can get an electronic copy of the MSDS for the fuels, as they have the breakdowns of what compounds are used in them.

Agree that it's a marketing exercise. Disagree that we should read brochures - that's the marketing...

I would like to find out what the MSDS says and what some car tuners think from tuning experience

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So been ocd with timing mark but checked from few angle and seems both cam are on and crank is matching as well to the slot on sump and crank pully   i noticed crankshaft cover has been robbed as per attached pic. Any ideas why? Could my balancer or harmonic be on its way out? should I replace the cover? https://ibb.co/ZR1JFYRR
    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
×
×
  • Create New...