Jump to content
SAU Community

Problem With Engine Cutting Out

daler32

By daler32,
in Engines & Forced Induction

 Share

Recommended Posts

daler32 Proficient

daler32

Posted
Posted

hey guys, have this problem with my r32 gtst, ill be driving along and change gear, then when i go to accelerate again the engine gets to about 2500rpm and then dies back down to about 1000rpm before kicking in again. it doesnt happen all the time only every now and again, doesnt matter how much fuel is in the tank or what temp the engine is. also if this happens and i come to a stop the car is idling at around 2000rpm, and if i turn the car off then back on again it seems to go away most of the time. ive talked to a mechanic and he said its probly the computer but then i talked to another mechanic and he said i may have to put the fuel pump (bosch 040) on a seperate relay circuit as there may be too much current running through the computer and it cuts out. would li8ke to get it fixed asap as i dont know if its doing any damage to things. mods on the car are splitfire coilpacks about 8 months old, front mount from a supra about 18 months old and the fuel pump about 6 months old. any info would be great thanks Dale

Link to comment
https://www.sau.com.au/forums/topic/141400-problem-with-engine-cutting-out/
Share on other sites
MR331307 Experienced

MR331307

Posted
Posted
hey guys, have this problem with my r32 gtst, ill be driving along and change gear, then when i go to accelerate again the engine gets to about 2500rpm and then dies back down to about 1000rpm before kicking in again. it doesnt happen all the time only every now and again, doesnt matter how much fuel is in the tank or what temp the engine is. also if this happens and i come to a stop the car is idling at around 2000rpm, and if i turn the car off then back on again it seems to go away most of the time. ive talked to a mechanic and he said its probly the computer but then i talked to another mechanic and he said i may have to put the fuel pump (bosch 040) on a seperate relay circuit as there may be too much current running through the computer and it cuts out. would li8ke to get it fixed asap as i dont know if its doing any damage to things. mods on the car are splitfire coilpacks about 8 months old, front mount from a supra about 18 months old and the fuel pump about 6 months old. any info would be great thanks Dale

Sounds like an Electrical Problem

Where u located

and Have you got access to the Diagnostic software to check the sensors and check whats happening in live mode

Last time i had this problem.The coil pack earth was loost and cutting the engine in and out but as for the hi reving sounds like vacum leak.

have you got a boost guage.What vacuum you running,Have you had the car on a dyno.

daler32 Proficient

daler32

Posted
  • Author
Posted

havent had the car on a dyno trying to fault find it. it doesnt happen all the time but ill check the earths on the coilpacks tomorrow. als o was watching the boost guage tonite and it was happing right as the turbo started forcing air in, ie as soon as the guage hit '0' bar. ill go through it on the weekend and replace all the vacuum lines incase its something like that. thanks again

DVS JEZ Grand Master

DVS JEZ

Posted
Posted
anyone have anythin more to share?

when you say afmeter is fine, how did you check it?

it is common that skyline afmeters intermittantly fail, due to break in the elec's inside the afmeter. pull it apart carefully and check the solder joints.

cheers

Jeremy

dan cohen Rookie

dan cohen

Posted
Posted

I had exactly the same sounding problem. It was intermitant, and turned out to be the AFM. As DVS32R stated, the solder in the connector box gets dry socket and lifts off every now and then. This is exactly what mine had done.

You can open the box with a stanly knife and resolder, but easier to get a new known good AFM.

There is a tut somewhere on the site on how to opon em up and resolder.

Good luck

WebR33 Enthusiast

WebR33

Posted
Posted

Hey mate

my car is doing the same shit like cutting out at random times and the car comes to a haul even. it gives the shits so much, had it on the diagnostist twice n it said AFM error. got a 2nd hand AFM off a dude on the this forum n i still had the same problems and error code. dont know how good the actual AFM i got 2nd was. but my cars back at the dealers at the moment getting looked at so, hopefully someone will shed some light on this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jumbotron
      Parts required for 4:11 diff gears in an R34 GTR Vspec (A-LSD)

      By Jumbotron · Posted

      Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • njdgomez23
      How to fix centre console latch.

      By njdgomez23 · Posted

      After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • marni
      I need more than help to finish my R33

      By marni · Posted

      Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • r32-25t
      Attesa pump mount options / ideas? R32 gtr style.

      By r32-25t · Posted

      From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • GTSBoy
      R34 Manual conversion Speedometer

      By GTSBoy · Posted

      Have you looked at the workshop manual?
×
×
  • Create New...