Jump to content
SAU Community

Sticker Removal....worst Sticker In My Life....need Help Asap.


Recommended Posts

Hi guys, this is the story i dont like the stickers they came with the car. Its a clear sticker looks like a expensive one, each corner is so tight its not funny. I've used.

Heatgun, wax & grease remover, and turps nothing works.

Nothing has happened to the paint yet but im not got to respray a whole guard over one sticker. There has to be a product on the market which can eat this away. No way can it come off like a normal sticker.

I've added the picture cause now, ive made it look like shit lol and need to take it off completly.

Please let me know anything, but im not using anything that could harm my paint. and please only tell me on your experience not just a theory you heard off someone lol.

Anyway i hope you guys can help me out. Thanks :)

sticker.jpg

sorry to be off topic but do u have potenza suspension in your car???

Sure do mate :)

ive used heat gun dude, it wont budge it gets so hot i reckon the paint will melt lol. Must be a car sticker which moulds itself into the paint lol I NEED HELP :)

try a hair dryer?? maybe try a cigarette lighter, jst for a few secs to melt the plastic...(do so at ur own risk :)

if u can get it big kevs goo remover will prolly work but check on packaging for paint. im sure i used it on a painted surface n it didnt hurt it. ye i did on my skyline:P worked to get sum gunk off the door trim from the rain deflectors that were there.

you could try a pretty heavy cut & polish compound, eucalyptus oil or "Pascoes OOMF Glue remover" which you can get at woolies in the cleaning aisle.

failing that, take it to a automotive paint specialist and see what they reckon....

Hot water ive tried that, ive went to a automotive speacialist said to me use a heat gun, tried that didnt work this sticker is the WORST! Anyone got a forsure solution. :ninja:

By looking at it, it appears to be made of something similar to the decals used on plastic kit models.

When they stick, they stick for life!

How about a steamer?

You know those little hand held steamer thingies?

Like this one

Only other thing I could suggest is to fold up a cloth (face washer or similar) so that it's a little bit bigger than the sticker, soak the cloth in boiling water (or as hot as you dare) and hold the cloth on the sticker for a while, possibly pouring more hot water over it at the same time, to try and keep it hot and as wet as possible.

Good luck, keep us informed

you tried sticking duct tape / gaffa tape to the sticker, rubbing it on, leaving it for a while and then ripping it off.

did it on the work van the other day trying to keep the door closed and when i ripped it off it took the paint with it...

I had to remove 20 year old stickers off my car that have baked into the paint really badly. I used a plastic razor blade and alot of paitence. It took hours to get two stickers off. Mine were that bad that even after a cut and polish you can still see the sticker marks.

Just take your time and do it over a few hours.

i am in the exact same boat, my car was covered in high quality vinyl stickers from japan, they peeled off the drivers side of the car fairly easily but the passenger side is another story. same problem as in the picture above.

where can you buy these plastic razor blades?

edit to add pics: :):O

post-9640-1162437471.jpg post-9640-1162437489.jpg

Edited by R32gts-t

Two words ... Eucalyptus Oil

At first I didnt believe that it would work but it did.

I had tape and stickers on the paint after my car was imported. I used Eucalyptus Oil and its gone...may have to put some real elbow grease into it....leaves a nice smell :)

I have tried prepsol which is stronger than eucalyptus oil, the sticker begins to peel off and then breaks about half a centimetre away from where it started.

I am going to try a plastic razor blade, where can i find one? :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome.  800hp should be a bit of weekend fun!
    • I'm going with "Just run two gates". Fix the problem conclusively. It's the only way you'd ever truly know, right?. This is all pretty much splitting hairs. Even the extreme example where it takes two whole seconds at 100kmh or something sounds monstrously dubious. And anyway, when you're punching the throttle when you 'need' this power, you aren't at 2800rpm in the wrong gear. Test it at 5600rpm in 3rd gear, when you're traction limited punching out of a sweeper. Much difference there when you account for traction?
    • And the full R32 GTR wiring diagrams are also freely available. Hmm.... there's supposed to be an auto replace that would have linked the thread. Here it is, manually  
    • Ahh...should have been clearer ~ there's 2 ... SMJ = super multi junction (connector)...   ...this is connector 6 & 25 in above image -- body harness to engine loom (6) & body harness to main loom (25) Headlights go to front via connector 6 ; fuel gauge goes to tank sender via connector 25  ...like I say this is R33 diagrams, but at a pinch R34 won't be too far different. *IF* the two ground faults are related, this can be the only place where both wires converge (as one runs to the back, the other to the front)... ....thing is, you probably need to establish if the faults are related (unless you examine that area and find obvious chaffing on the looms there to body ground)....*IF* the fuel gauge is still broken (full needle deflection), I'd be headed for the boot, remove fuel sender wire, key on and measure the voltage there ~ it should be roughly 10volts. If that's ok, check sender to ground resistance...if this is a dead short to ground (and there's fuel in it), then sender has failed or something funky has happened to wiring in the tank. edit: ahh...rereading the thread, this is R32....above fuel sender test still valid tho'
    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
×
×
  • Create New...