Jump to content
SAU Community

Recommended Posts

hey guys i just bought a avcr but im missing a few parts due to the owner forgeting to remove all of the parts before selling his car.

i have all wiring but for the pressure sensor and a few T joints and other nipples. anways i can easily buy T joints but does anyone know if i can use an pressure sensor as a replacement?

i think i need the important parts 3, 17,18,19. can anyone help me out. i would be installing this on my car with stock turbo with internal wastegate. what parts DO i DESPERATELY need to find?

thanks in advance

post-17292-1162397374.jpg

Link to comment
https://www.sau.com.au/forums/topic/141471-avcr/
Share on other sites

As far as i know, from fitting one on a friends car, the original parts you need is 1,2,3,4 also the airfilter nr:13 is a good one to have, other then that its just to go to a shop to buy nipples, hoses and clamps in appropriate sizes.

Some products have a t-joint with a restrictor inside, but as far as i recall the AVCR doesnt.

On the solenoid there is 3 holes, but youll only need 2 nipples and a screw or similar to block the last hole off.

When mounting the solenoid its always good to use some sort of rubberplate or similar between the mountingplate and the car.

Hope that helps some!

-Cheers!

Link to comment
https://www.sau.com.au/forums/topic/141471-avcr/#findComment-2634986
Share on other sites

lol did you buy the AVCR off ebay? That one went for a bargain price!

If you already have the wiring harness, then you only really need to get the pressure sensor. All the rest of the parts you could get from your local auto store.

Edited by NathR32
Link to comment
https://www.sau.com.au/forums/topic/141471-avcr/#findComment-2635005
Share on other sites

read

http://paulr33.skylinesaustralia.com/docs/...powerfc-faq.htm

and goto the section:

62. -> Boost display without the Boost Control Kit?

27. -> How does the AVC-R compare to the PowerFC boost controller kit?

17. -> What other optional parts are available for the PowerFC?

Link to comment
https://www.sau.com.au/forums/topic/141471-avcr/#findComment-2637607
Share on other sites

i dont have a pfc. but just the standard computer.

oh i get it, so i can purchase that "map sensor" as its known since the pressure sensor and map sensor are virtually the same?

"By default as the PowerFC will not show boost pressure as it has no method of reading it in via the stock ECU loom. If you purchase a suitable map sensor and connect it to the PowerFC boost control kit port then the hand controller will display boost pressure. The boost control kit uses a Denso map sensor which is part #DPS 310 2000a - Denso 949940 6270 5V and the wiring loom cable/plug can be brought from Apexi which is around $40 AU. The cable is listed as the 3pin boost control harness. Nengun has this listed under Electronics -> Apexi -> D Jetro Option Parts"

thanks heaps Paul

can anyone else confirm this.

Link to comment
https://www.sau.com.au/forums/topic/141471-avcr/#findComment-2637893
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It's excellent but I'm still breaking it in so I'm not 100% sure where it'll end up. I would say it's about 15% heavier than stock and the smoothness of the slip zone is quite progressive but you need to be a little patient compared to stock or it'll bite hard and stall. Stock I got away with absolutely horrid clutch control. Like I said before I couldn't even tell where the clutch would grab when it was stock so releasing way too quickly without enough revs it would just slip and the revs would drop lower than ideal but that would be the end of it. Currently there's a bit of a nasty clutch judder if I don't apply enough revs + find the exact wrong point of the slip point in the clutch pedal but it feels like it's slowly resolving as I drive it more. I would not recommend the competition clutch unless you really need the extra clamp force. I think this clutch combined with the Nismo operating cylinder is going to be exactly what I want. Enough bite that you need to remember the release point to avoid stalling or rough shifts, but progressive enough that it's not hard to drive by any means and not heavy at all. I tried a "super single" clutch on my friend's 997.2 Turbo 6MT and that was absolutely horrid. It runs an electrohydraulic power steering pump for the clutch power boost so there's zero feedback in the clutch pedal and there was a horrific clutch shudder well after break-in due to the lack of marcel springs or hub springs in the friction disk. It felt like the slip zone was the thickness of a single toe twitch as well so it was almost impossible to avoid stalling it unless you gave it a ton of revs and just dumped the clutch instead of trying to be smooth with it. I was terrified of pulling out in front of traffic. I have also tried some kind of "super single" on an EK9 and that makes this twin plate Coppermix look like a stock clutch. Releasing the clutch pedal even slightly too quickly feels like you're getting rear-ended. The pedal is extremely heavy as well and there's no vacuum assist like the GTR.
    • Yeah, well I was probably way underguessing the $300 figure anyway. Just multiplied a "normal" by 4 for the purposes of pointing out it's not cheap, particularly if it has to be repeated.
    • We have an alignment shop out here that does what you're talking about but he wants like 800 AUD a pop. DIY is "cheaper" but once you start accounting for the value of your time I'm not sure it's worth it.
    • The main catch phrase for any car is "the eye of the beholder", and "personal tastes and preferences" And as for the plastic "flares", I honestly think they look cheap and tacky, and I cannot see them aging well, maybe if they were body colour they might look better to my eyes, but, I would still prefer it the were more like the older WRX STI models that had the wider body metal panels In saying all this 5hit, I wouldn't buy a new WRX again, even if it had the wide body metal panels    
×
×
  • Create New...