Jump to content
SAU Community

Recommended Posts

Yep its definitely difficult to slide on especially if the attachment has a lip of any sort.

Grab a rag and smear on some rp7/wd40. Works quite well.

Just don't go overboard as wd40 i'd imagine isn't too good for the oil. :(

Connecting it to the motor is difficult and you will end up feeling like your going to break your forearm pushing it on.

Cut the oil drain off so that its straight, thats what i ended up having to do as mine too was on an angle or does it angle from the start of the attachment? :S

That bit of hose I gave you was the softest stuff I found in that size. The gear I got from pirtek was very very solid.

haha, i shouldn't have posted this in this thread, oh well!

The problem i'm having you see is that my oil drain isn't directly at the bottom of the turbo which causes more headaches with the angle that it is on, i have already chopped it shorter as i used the xr6t oil drain with a new tube welded on. Because of the angle the hose has to bend into an 's' shape which just crimps it and only the cheap shit i have seems to wanna bend without crimping!

Ahh ok so the centre cartridge wasn't unbolted and moved so that its 'square' if you like?

Have a look in the sticky there's another rubber hose bloke who deals with only hoses. Pop through there and see what he has.

I was really after just a nice rubber oil resistant hose like stock uses but Adelaide hose and belt only had the pressure stuff that tends to be a little stiff.

Speaking of which, anyone know where I can get silicone intercooler hose piping? I want 3" stuff but everyone just sells couplings that are 3" x 3". I want a longer one, about 5" long instead. Sorry for the hijack.

Ahh ok so the centre cartridge wasn't unbolted and moved so that its 'square' if you like?

Have a look in the sticky there's another rubber hose bloke who deals with only hoses. Pop through there and see what he has.

I was really after just a nice rubber oil resistant hose like stock uses but Adelaide hose and belt only had the pressure stuff that tends to be a little stiff.

i thought only the 2 housings moved and not the centre bit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...