Jump to content
SAU Community

Recommended Posts

G'day all, time to sell (or swap) my pride and joy as I am looking to purchase an r33 gtst

Green Honda Integra, 1998 model Series II DC4 for sale.

* Completely stock standard

* Never thrashed - well looked after

* Serviced every 5000 km's

* Interior and exterior as new (see photos on link)

* Low km's (109,000)

* Long Rego!

1380410.jpg

1380411.jpg

1380414.jpg

I have been using this car to travel back and forth from uni over the last year; I bought it with around 80K on the clock just under 2 years ago but all the km's are freeway/highway.

This car is always clean, inside and out and always garaged at home. These cars are extremely reliable and fuel efficient.

Also comes with professionally installed kenwood splits in the front (see pic on link) which I would have taken with me if I could!

If you have any questions about my car contact me on mobile, email or PM!

PRICE: $13,999 neg

OR SWAP: I am looking for a stock white r33 s2 manual. If anyone is interested in a swap let me know!

Contact Sam:

mob: 0409 568 760

email: [email protected]

or PM!

Carsales link: http://www.carsales.com.au/pls/carsa...e=2&make_id=19

Link to comment
https://www.sau.com.au/forums/topic/141666-1998-honda-integra-sale-or-swap-vic/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is possibly 55 degrees for the Nismo version. I had a look through the manual and the stocker has a breakaway torque of 2.5 to 3.5kgm. Supposedly the Nismo LSD goes down to 5kgm when worn in but it is pretty grabby even with very little throttle. Worse when cold. So I guess you have three things. 1. Shims. 2 Friction plates 3. Cams Would think shims would be the easiest but Ive no clue how many tenths of a mm shim thickness change equals how many kgm torque. Also not sure if the Nismo friction plates are similar/different to stock or if they are the most of the source of the diff being angry. Think I can write off the Nismo rebuild kit for the standard diff as not being what I want.  
    • Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
    • Factory LSD is supposedly a 2 way with a very conservative cam. If you've already tried adding friction modifier to the diff oil and it still locks up too much for your liking you might want to adjust the ramp rate on the cam to be more like OEM instead of reducing initial torque even further. People claim the 8 kgf-m disc kit for the OEM LSD is still very streetable but I've never been able to compare everything side by side on my own.
    • Oh man, at least it sounds they've accepted they stuffed up and not put it back on you...could see some confusion if they asked if it had a hardtop or not, and you've answered truthfully but maybe not answering their real question which is what roof did it have from the factory! Glad your keeping it N/A 2.5
    • Nah, I much prefer colour matched Talking about colour matching stuff, the new/used boot lid turned up, all painted up perfectly......aaaannnndddd, it's for a power retractable hard top, not a soft top.....LOL They are now sending a boot to fit a soft top.....,  whilst frustrating, life is like that sometimes, sometimes you just need to dodge, duck, dip, dive and, ummm, dodge.
×
×
  • Create New...