6boost Rb20/rb25det Manifolds

[croat]

I have organised a group buy through 6boost on calaisturbo.com.au for his manifolds. these can either be hi or low mount rb(20/25/26/30) manifolds. the flange on the manifold can either be t3 or t25. Fot those of you with other than rb engines contact me if you wish for a manifold and i can work out a price and include you in the group buy.

This group buy is set end on 30th November 2006 where the manifolds will be ordered and when completed dispatched. all that is required is a $100 deposit by the 30/11/06. Depending on numbers it will take approximately 2 weeks for your manifold to be completed.

These manifolds are hands down the best on the market. i have looked into and spoken to people that have used his manifolds and have had only 100% positive comments. Below is a link to his thread on calaisturbo where you can read up on the product.

http://www.calaisturbo.com.au

The normal retail price for one of these maniflds is $1200, which comes with a fitting kit with turbo gasket and new studs and nuts for head and turbo flanges, and manifolds also come with a lifetime warranty.

As for a group buy price:

- 3 manifolds = $1000

- 5 manifolds = $900

Any questions just post up here.

Boro.

[FLYSLY]

Pretty interested

[croat]

cmon people. there has to be some people out there chasing big power. much better option than going cheap stainless options and the like. the difference will be noticable.

[Drifterdan]

Spewin, I just ordered mine for a bit more than that, sorry

But I'll vouche that these manifolds are faultless!

[woolls]

Pretty interested

me too in a low mount

Edited November 6, 2006 by woolls

[croat]

flysky and woolls are you both in? cuz that makes 3.. that is the minimum requirement. let me know what you guys are after. manifold for what engine/flange type, external/internal gate etc.. thanks.

[woolls]

can you get a pic of the low mount for rb25. also does the price include delivery?

[Nabil]

manifold.doc

Hey I would like one for a top mount rb25 with external wastegate outlet on it like this one here.

How much is postage? Can i pick it up? With T3 flange please.

Edited November 8, 2006 by Nabil

[croat]

nabil that should be no problem. what wastegate do you intend to run? you may be able to pick it up. not sure on postage at the moment but will have an answer next day or so.

[croat]

anyone?

[Cubes]

me too in a low mount

I've had a small discussion with 6boost some time ago regarding the making of a lowmount manifold for the dohc. He wasn't interested as he couldn't use his collector. Such a pitty as any low mount he could put together would be better than the current ebay types. I suggested something along the lines of a HKS manifold design but he just wasn't interested.

So many of us DOHC heads buy those ebay things too, if only something in low mount was available.

[woolls]

I've had a small discussion with 6boost some time ago regarding the making of a lowmount manifold for the dohc. He wasn't interested as he couldn't use his collector. Such a pitty as any low mount he could put together would be better than the current ebay types. I suggested something along the lines of a HKS manifold design but he just wasn't interested.

So many of us DOHC heads buy those ebay things too, if only something in low mount was available.

thanks for letting me know cubes

[WazR32GTSt]

do you have any picks of the low-mount type for an rb20 with T3 flange (so basically setup with turbo in same position as stock etc.)

cheers,

Warren

[croat]

waz. no i dont have pics. i have messaged 6boost but have had no reply. if you are intending on keeping stock turbo not too much point in getting one of these manifolds. im not 100% sure he will maintain stock positioning with the manifold.

[Color_Of_Green]

I've had a small discussion with 6boost some time ago regarding the making of a lowmount manifold for the dohc. He wasn't interested as he couldn't use his collector. Such a pitty as any low mount he could put together would be better than the current ebay types. I suggested something along the lines of a HKS manifold design but he just wasn't interested.

So many of us DOHC heads buy those ebay things too, if only something in low mount was available.

yeah

I had a low mount ordered but was sent back due to flange facing up instead of away from engine... so isnt really possible with their collector.

Someone should take on the HKS design..

[woolls]

yeah

I had a low mount ordered but was sent back due to flange facing up instead of away from engine... so isnt really possible with their collector.

Someone should take on the HKS design..

Can you still buy hks low mounts for rb25?

[Cubes]

Second hand they are around... maybe..

[SKY 34]

what is the material used for the manifold? any coating?

[eSKiMo]

do you have any picks of the low-mount type for an rb20 with T3 flange (so basically setup with turbo in same position as stock etc.)

cheers,

Warren

would be very interested in seeing a pic of the low mount rb20 with t3 as well... runnning a trust td-05 kit though

[croat]

what is the material used for the manifold? any coating?

they are made out of steam pipe. they can be coated (black) or heat wrapped at an extra cost (around $300).